Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SMD-6

SFH636

www.vishay.com

Vishay Semiconductors

Rev. 1.8, 03-Aug-15

Document Number: 83681

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

High Speed Optocoupler, Phototransistor Output, 1 MBd,

10 kV/μs CMR, Split Collector Transistor Output

DESCRIPTION

The SFH636 is an optocoupler with a GaAlAs infrared

emitting diode, optically coupled to an integrated photo

detector consisting of a photo diode and a high speed

transistor in a DIP-6 plastic package. The device is

functionally similar to 6N136 except there is no base

connection and the foot print is different. Noise and

common mode rejection performance is enhanced by not

bringing out the base connection.

Signals can be transmitted between two electrically

separated circuits up to frequencies of 2.0 MHz.

FEATURES

• High CMR of 10 kV/μs

• High speed optocoupler without base connection

• GaAlAs emitter

• Integrated detector with photo diode and

transistor

• TTL and CMOS compatible

• Open collector output

• Supply voltage up to 30 V

• High CTR

• Good CTR linearity relative to forward current

• Low coupling capacitance

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• IGBT drivers and MOSFET driver stages

• Data communications

• Programmable controllers

• IPM drivers

AGENCY APPROVALS

• UL1577, file no. E52744, double protection

• cUL tested to CSA 22.2 bulletin 5A

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

Note

• Additional options may be possible, please contact sales office

EA2 5

CNC 34

VC 16

ORDERING INFORMATION

SFH636-X0##T

PART NUMBER PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE CTR (%)

UL ≥ 19

DIP-6 SFH636

SMD-6, option 7 SFH636-X007, SFH636-X007T

SMD-6, option 9 SFH636-X009

VDE, UL ≥ 19

DIP-6 SFH636-X001

DIP-6, option 6 SFH636-X016

SMD-6, option 7 SFH636-X017, SFH636-X017T

7.62 mm

DIP-#

> 0.6 mm

Option 7 Option 9

> 8 mm

10.16 mm

Option 6

Summary of content (9 pages)

PAGE 1
SFH636 www.vishay.
PAGE 2
SFH636 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER CONDITIONS SYMBOL VALUE UNIT Reverse voltage VR 3.0 V DC forward current IF 25 mA INPUT Surge forward current tP ≤ 1.0 μs, 300 pulses/s IFSM 1.0 A Pdiss 45 mW Supply voltage VS -0.5 to +30 V Output voltage VO -0.
PAGE 3
SFH636 www.vishay.com Vishay Semiconductors V out 5V IF C = 100 nF 1 6 2 5 3 4 VCC 1.5 V 100 Ω Pulse generator Zo = 50 Ω tr ,tf = 5 ns duty cycle = 10 % period = 100 µs isfh636_01 0 RL t t PHL VO t PLH IF CL = 15 pF 16 mA t 0 isfh636_02 Fig. 1 - Test Setup Fig. 2 - Switching Time Measurement CURRENT TRANSFER RATIO (Tamb = 0 °C to 70 °C unless otherwise specified, typ. values Tamb = 25 °C) PARAMETER IC/IF TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 16 mA, VO = 0.
PAGE 4
SFH636 www.vishay.
PAGE 5
SFH636 www.vishay.com 120 mW 1.3 Detector 100 Ptot Vishay Semiconductors NCTR 80 0.9 Emitter 40 0.8 20 0.7 0 10-6 IF/mA 20 40 60 TA ºC 100 V0 = VCC = 5.0 V, IF = 0 10-7 101 IOH 10-8 100 10-9 10-1 10-10 10-2 10-11 0 1.2 1.3 VF/V 1.4 1.5 1.6 Fig. 8 - Forward Current of Emitting Diode vs. Forward Voltage 0.50 % 0.45 IF 0 Fig. 10 - Current Transfer Ratio (Normalized) vs. Ambient Temperature 102 10-3 IF = 16 mA, VO = 0.4 V, VCC = 5.0 V 0.
PAGE 6
SFH636 www.vishay.com Vishay Semiconductors 1.2 % 1.1 NCTR 0.8 0.6 IF = 16 mA, VO = 0.4 V, 0.4 VCC = 5.0 V 0.2 0 6N 135 6N 136 10-4 103 10-2 IF A 10-1 Fig. 13 - Current Transfer Ratio (Normalized) vs. Forward Current PACKAGE DIMENSIONS in inches (millimeters) DIP-6 9.00 max. 7.62 typ. 8.60 ± 0.10 6.50 ± 0.25 0.79 min. 3.10 ± 0.50 3.55 ± 0.25 0.90 min. 0.85 ± 0.10 0.50 ± 0.10 3° to 9° 1.27 ± 0.10 2.54 typ. 6 5 4 1 2 3 0.25 ± 0.10 Pin one I.D. Rev. 1.
PAGE 7
SFH636 www.vishay.com Vishay Semiconductors DIP-6, Option 6 10.16 typ. 9.00 max. 7.62 typ. 8.60 ± 0.10 6.50 ± 0.25 3.05 ± 0.50 3.55 ± 0.25 0.10 min. 0.90 min. 0.85 ± 0.10 0.25 ± 0.10 0.50 ± 0.10 10.55 ± 0.40 1.27 ± 0.10 2.54 typ. 6 5 4 1 2 3 Pin one I.D. SMD-6, Option 7 10.30 max. 9.00 max. 7.62 typ. 8.60 ± 0.10 1.27 ± 0.10 0.25 ± 0.10 0.70 min. 3.55 ± 0.25 0.90 min. 0.50 min. 8.00 min. Leads coplanarity 0.1 max. 2.54 typ. 5 4 .25 R0 1.78 2.54 0.76 6 4.30 ± 0.30 6.
PAGE 8
SFH636 www.vishay.com Vishay Semiconductors SMD-6, Option 9 10.05 max. 9.00 max. 7.62 typ. 8.60 ± 0.10 6.50 ± 0.25 0.25 ± 0.10 0.20 ± 0.10 3.55 ± 0.25 0.90 min. Leads coplanarity 0.1 max. 8.00 min. 0.50 min. 1.27 ± 0.10 2.54 typ. 5 4 0.76 6 .25 1.78 2.54 R0 1.52 Pin one I.D. 8.00 min. 11.05 1 2 3 SOLDER PROFILES 300 300 5s Lead temperature ca.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.