Datasheet
SMM0207
www.vishay.com
Vishay Draloric
Revision: 12-Jun-17
12
Document Number: 20005
For technical questions, contact: melf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
Notes
• Color code marking is applied according to IEC 60062
(1)
in four (E24 series) or six bands (E96 series). Each color band appears as a single
solid line, voids are permissible if at least
2
/
3
of the band is visible from each radial angle of view. The last color band represents the TCR for
resistors with TCR ≤ 50 ppm/K and nominal tolerance ≤ 1 %
• Zero ohm jumper are marked with one centered black band
PATTERN STYLES FOR MELF RESISTORS
Notes
• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x
(1)
,
or in publication IPC-7351
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
DIMENSIONS AND MASS
TYPE / SIZE
L
(mm)
D
(mm)
L
1 min.
(mm)
D
1
(mm)
K
(mm)
MASS
(mg)
SMM0207
OMM0207
5.8 + 0 / - 0.3 2.2 ± 0.2 2.6 D + 0 / - 0.2 1.25 ± 0.2 77
RECOMMENDED SOLDER PAD DIMENSIONS
TYPE / SIZE
WAVE SOLDERING REFLOW SOLDERING
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
G
(mm)
Y
(mm)
X
(mm)
Z
(mm)
SMM0207
OMM0207
2.4 2.3 2.6 7.0 2.6 2.0 2.4 6.6
L
1
K
D
1
D
L
G
X
Y
Z