Datasheet

ManualsBrandsVishay ManualsCapacitorsTantalum Capacitor with Polymer Cathode 150uF ±20% 10V

T55

www.vishay.com

Vishay Polytech

Revision: 18-Apr-2019

Document Number: 40174

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

vPolyTan

Polymer Surface Mount Chip Capacitors,

Molded Case, High Performance Type

DESIGN SUPPORT TOOLS AVAILABLE

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

Operating Temperature: -55 °C to +105 °C

Capacitance Range: 3.3 μF to 1000 μF

Capacitance Tolerance: ± 20 %

Voltage Rating: 2.5 V

to 63 V

FEATURES

• Ultra low ESR

• 100 % surge current tested

• Accelerated voltage conditioning

• High ripple current capability

• Stable capacitance in operating temperature

range

• Better capacitance stability vs. frequency

• No wear out effect

• Molded case available in 8 case codes

• Terminations:

cases J, P: 100 % tin

case A: 100 % tin or Ni / Pd / Au

cases T, B, Z, V, D: Ni / Pd / Au

• Compatible with “high volume” automatic pick and place

equipment

• Moisture sensitivity level 3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Decoupling, smoothing, filtering

• Bulk energy storage in wireless cards

• Infrastructure equipment

• Storage and networking

• Computer motherboards

• Smartphones and tablets

3D Models

Models

Calculators

ORDERING INFORMATION

T55 B 156 M 6R3 C 0500

TYPE CASE

CODE

CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

TERMINATION /

PACKAGING

ESR

See

Ratings

and

Case

Codes

table

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the

number of zeros

to follow.

M = ± 20 % 2R5 = 2.5 V

004 = 4 V

6R3 = 6.3 V

007 = 7 V

010 = 10 V

12R = 12.5 V

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

063 = 63 V

C = lead (Pb)-free

solderable coating,

7" reel

Maximum

100 kHz ESR

in mΩ

Summary of content (25 pages)

PAGE 1
T55 www.vishay.com Vishay Polytech vPolyTanTM Polymer Surface Mount Chip Capacitors, Molded Case, High Performance Type FEATURES • Ultra low ESR • 100 % surge current tested • Accelerated voltage conditioning • High ripple current capability • Stable capacitance in operating temperature range • Better capacitance stability vs.
PAGE 2
T55 www.vishay.com Vishay Polytech DIMENSIONS in inches [millimeters] J case P case Anode indication belt mark L Anode indication belt mark W L W W W H a l H l a l l D, V, Z case A, B, T case Anode indication belt mark H L l a W l l W l a H a L CASE CODE EIA SIZE L W H l a J 1608-09 0.063 ± 0.004 [1.6 ± 0.1] 0.031 ± 0.004 [0.8 ± 0.1] 0.031 ± 0.004 [0.8 ± 0.1] 0.012 ± 0.006 [0.3 ± 0.15] 0.024 ± 0.004 [0.6 ± 0.1] P 2012-12 0.080 ± 0.008 [2.0 ± 0.2] 0.049 ± 0.
PAGE 3
T55 www.vishay.com Vishay Polytech RATINGS AND CASE CODES μF 2.5 V 4.0 V 6.3 V 7.0 V 10 V 3.3 J/P J/P 4.7 J/P/A P/A 6.8 P/A A 10 J/P/A P/A A 15 P/A A A 12.
PAGE 4
T55 www.vishay.com Vishay Polytech MARKING J, P case Anode indication belt mark Simplified code of nominal capacitance (S: 4.7 μF) SJ + Simplified code of rated voltage (J: 6.3 V) RATED VOLTAGE CAPACITANCE MARKING 4 10 AG 4 15 EG 6.3 3.3 NJ 6.3 4.7 SJ 6.3 6.8 WJ 6.3 10 AJ 10 3.3 NA 10 4.
PAGE 5
T55 www.vishay.
PAGE 6
T55 www.vishay.
PAGE 7
T55 www.vishay.
PAGE 8
T55 www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER 3.3 3.3 4.7 4.7 4.7 6.8 6.
PAGE 9
T55 www.vishay.
PAGE 10
T55 www.vishay.
PAGE 11
T55 www.vishay.
PAGE 12
T55 www.vishay.com Vishay Polytech STANDARD RATINGS MAX. ESR AT + 25 °C 100 kHz (mΩ) MAX. RIPPLE AT 45 °C 100 kHz IRMS (A) HIGH TEMPERATURE LOAD, TIME (h) 80 1.14 1000 200 200 100 150 90 150 70 70 45 70 45 70 50 50 50 50 40 15 0.80 0.80 1.14 0.93 1.20 0.93 1.36 1.63 2.03 1.63 2.03 1.79 1.93 1.93 2.12 2.12 2.37 3.87 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 90 70 70 45 55 1.20 1.36 1.63 2.03 2.
PAGE 13
T55 www.vishay.com Vishay Polytech RECOMMENDED VOLTAGE DERATING GUIDELINES CAPACITOR VOLTAGE RATING OPERATING VOLTAGE 2.5 2.3 4.0 3.6 6.3 5.7 7.0 6.3 10 9.0 12.5 11.2 16 12.8 20 16 25 20 35 28 50 40 63 50 POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION (W) AT ≤ +45 °C IN FREE AIR J 0.050 P 0.064 A 0.115 T 0.105 B 0.130 Z 0.187 V 0.187 D 0.
PAGE 14
T55 www.vishay.
PAGE 15
Polymer Guide www.vishay.com Vishay Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations.
PAGE 16
Polymer Guide www.vishay.com Vishay SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system.
PAGE 17
Polymer Guide www.vishay.
PAGE 18
Polymer Guide www.vishay.com Vishay POLYMER CAPACITORS - MOLDED CASE SERIES T55 PRODUCT IMAGE VPolyTanTM, molded case, high performance polymer High performance -55 °C to +105 °C 3.3 μF to 1000 μF 2.5 V to 63 V ± 20 % 0.
PAGE 19
Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T55 TYPE PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters E A B C Label D W TAPE WIDTH A+0/-3 B+1/0 C ± 0.2 D ± 0.5 E ± 0.5 W ± 0.3 8 12 Ø 180 Ø 60 Ø 13 Ø 21 2.0 9.0 13.0 Note • A reel diameter of 330 mm is also applicable PLASTIC TAPE SIZE DIMENSIONS in millimeters Pocket Perforation E Ø 1.5 + 0.10 W B F A P1 t Direction of tape flow 4.0 ± 0.1 2.0 ± 0.
PAGE 20
Polymer Guide www.vishay.com Vishay LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] max. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape B1 (max.) (6) 10 pitches cumulative tolerance on tape ± 0.008 [0.200] Embossment 0.079 ± 0.002 0.069 ± 0.004 [2.0 ± 0.05] [1.75 ± 0.10] A0 K0 0.030 [0.75] min. (3) B0 0.030 [0.75] min.
PAGE 21
Polymer Guide www.vishay.com Vishay CARRIER TAPE DIMENSIONS in inches [millimeters] CASE CODE TAPE SIZE B1 (MAX.) (1) D1 (MIN.) F K0 (MAX.) P1 W 0.071 [1.8] 0.315 ± 0.004 [8.0 ± 0.10] 0.476 ± 0.008 [12.1 ± 0.20] E5 12 mm 0.329 [8.35] 0.059 [1.5] 0.217 ± 0.002 [5.50 ± 0.05] MM (2) 8 mm 0.075 [1.91] 0.02 [0.5] 0.138 [3.5] 0.043 [1.10] 0.157 [4.0] 0.315 [8.0] M1 12 mm 0.32 [8.2] 0.059 [1.5] 0.217 ± 0.002 [5.5 ± 0.05] 0.094 [2.39] 0.315 ± 0.04 [8.0 ± 1.0] 0.472 + 0.012 / - 0.
PAGE 22
Polymer Guide www.vishay.com Vishay PACKING AND STORAGE Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC® J-STD-020 and are dry packaged in moisture barrier bags (MBB) per J-STD-033. MSL for each particular family is defined in the datasheet - either in “Features” section or “Standard Ratings” table. Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor life of 72 hours at 30 °C maximum and 60 % relative humidity (RH).
PAGE 23
Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T55 TYPE PAD DIMENSIONS in millimeters L X Capacitor Pattern Y W G Z CAPACITOR SIZE PAD DIMENSIONS CASE / DIMENSIONS L W G (max.) Z (min.) X (min.) Y (Ref.) J 1.6 0.8 0.7 2.5 1.0 0.9 P 2.0 1.25 0.5 2.6 1.2 1.05 A 3.2 1.6 1.1 3.8 1.5 1.35 T/B 3.5 2.8 1.4 4.1 2.7 1.35 Z/V/D 7.3 4.3 4.1 8.2 2.9 2.
PAGE 24
Polymer Guide www.vishay.com Vishay GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I R MS = 4. Reverse Voltage: the capacitors are not intended for use with reverse voltage applied. However, they are capable of withstanding momentary reverse voltage peaks, which must not exceed the following values: At 25 °C: 10 % of the rated voltage or 1 V, whichever is smaller. At 85 °C: 5 % of the rated voltage or 0.5 V, whichever is smaller.
PAGE 25
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.