Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SOP-4 70V

TCMT110. Series

www.vishay.com

Vishay Semiconductors

Rev. 3.1, 25-Jun-2018

Document Number: 83510

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, Single Channel,

Half Pitch Mini-Flat Package

DESCRIPTION

The TCMT110. series consist of a phototransistor optically

coupled to a gallium arsenide infrared-emitting diode in a

4 pin package.

The elements are mounted on one leadframe providing a

fixed distance between input and output for highest safety

requirements.

FEATURES

• Low profile package (half pitch)

• AC isolation test voltage 3750 V

RMS

• Low coupling capacitance of typical 0.3 pF

• Current transfer ratio (CTR) selected into groups

• Low temperature coefficient of CTR

• Wide ambient temperature range

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Programmable logic controllers

•Modems

• Answering machines

• General applications

AGENCY APPROVALS

• UL1577, file no. E76222, double protection

• cUL component acceptance service no. 5A, double

protection

• DIN EN 60747-5-5 (VDE 0884-5)

• FIMKO: FI EN 60950-1:2006

• BSI: BS EN60065:2002

BS EN60950-1:2006

• CQC GB 8898-2011, GB 4943.1-2011 (suitable for

installation altitude below 2000 m)

Notes

• Available only on tape and reel

(1)

Product is rotated 180° in tape and reel cavity

22628-1

ORDERING INFORMATION

TCMT110#

PART NUMBER

AGENCY

CERTIFIED/

PACKAGE

CTR (%)

5 mA 10 mA 5 mA

UL, cUL, FIMKO,

BSI, VDE

50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400

SSOP-4 TCMT1100 TCMT1101 TCMT1102 TCMT1103 TCMT1104 TCMT1105 TCMT1106

TCMT1107,

TCMT1107T3

(1)

TCMT1108 TCMT1109

SSOP-4

7.21 mm

Summary of content (9 pages)

PAGE 1
TCMT110. Series www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package C E 4 3 FEATURES • Low profile package (half pitch) • AC isolation test voltage 3750 VRMS • Low coupling capacitance of typical 0.3 pF • Current transfer ratio (CTR) selected into groups 1 2 • Low temperature coefficient of CTR A C • Wide ambient temperature range 22628-1 • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
TCMT110. Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp ≤ 10 μs IFSM 1.5 A Pdiss 100 mW Tj 125 °C Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V mA Power dissipation Junction temperature OUTPUT Collector current Collector peak current tp/T = 0.
PAGE 3
TCMT110. Series www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX.
PAGE 4
TCMT110. Series www.vishay.
PAGE 5
TCMT110. Series www.vishay.com IC - Collector Current (mA) 55 IF = 35 mA 50 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 0 0 1 2 3 4 5 6 7 8 9 10 NCTR - Normalized CTR (non-saturated) Vishay Semiconductors 1.2 IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 VCE - Collector Emitter Voltage (non-sat) (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage 20 40 60 80 100 120 Fig.
PAGE 6
TCMT110. Series www.vishay.com Vishay Semiconductors 1000 Tamb = 0 °C 1.2 VCC = 5 V Tamb = -55 °C Tamb = 25 °C 1.0 FCTR (kHz) NCTR - Normalized CTR (NS) 1.4 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 100 °C Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 0.2 0 0.1 1 10 100 10 1 0.1 100 1 IF - Forward Current (mA) Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current 100 Fig. 15 - FCTR vs. Collector Current 1000 1.2 Tamb = 0 °C VCE = 0.
PAGE 7
TCMT110. Series www.vishay.com Vishay Semiconductors 0.60 0.10 ± 0.10 0.4 ± 0.1 4.40 typ. 0.2 ± 0.05 2.85 max. 2.60 ± 0.20 2.00 ± 0.10 PACKAGE DIMENSIONS in millimeters 1.27 nom. 4 + 0.20 - 0.30 7.00 ± 0.30 Lead coplanarity 0.1 max. 3 1.27 0.9 Possible footprint 5.00 7.60 Pin One I.D. 1 2 PACKAGE MARKING (example) MT1100 V YWW 68 TAPE AND REEL PACKAGING in millimeters 2 ± 0.1 0.3 ± 0.05 4 ± 0.1 1.55 ± 0.05 1.75 ± 0.1 Pin 1 7.5 ± 0.1 16 ± 0.3 4.4 7.4 ± 0.1 7.4 ± 0.1 5° 2.2 ± 0.
PAGE 8
TCMT110. Series www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Axis Title 10000 300 Floor life: unlimited Max. 260 °C 255 °C 240 °C 217 °C Conditions: Tamb < 30 °C, RH < 85 % 245 °C Moisture sensitivity level 1, according to J-STD-020 1000 200 Max. 30 s 1st line 2nd line 2nd line Temperature (°C) 250 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 °C/s 100 Max.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.