Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED 1608 Red 4 mcd 160 ° 2 mA 1.8 V

TLMO1000, TLMS1000, TLMY1000

www.vishay.com

Vishay Semiconductors

Rev. 2.0, 27-Sep-13

Document Number: 83172

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Low Current 0603 SMD LED

DESCRIPTION

The new 0603 LED series have been designed in the

smallest SMD package. This innovative 0603 LED

technology opens the way to

• Smaller products of higher performance

• More design in flexibility

• Enhanced applications

The 0603 LED is an obvious solution for small-scale, high

power products that are expected to work reliability in an

arduous environment.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD 0603

• Product series: low current

• Angle of half intensity: ± 80°

FEATURES

• Smallest SMD package 0603 with exceptional

brightness 1.6 mm x 0.8 mm x 0.6 mm

(L x W x H)

• High reliability lead frame based

• Temperature range -40 °C to +100 °C

• Footprint compatible to 0603 chipled

• Wavelength 633 nm (red), 606 nm (orange),

587 nm (yellow)

• AllnGaP technology

• Compatible to IR reflow soldering

• Viewing angle: Extremely wide 160°

• Grouping parameter: Luminous intensity, wavelength

• Available in 8 mm tape

• Preconditioning according to JEDEC

level 2

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Backlight keypads

• Navigation systems

• Cellular phone displays

• Displays for industrial control systems

• Automotive features

• Miniaturized color effects

• Traffic displays

Note

(1)

Driving the LED in reverse direction is suitable for short term application

18562

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

TLMS1000-GS08 Red 1.8 4 - 2 624 628 636 2 - 1.8 2.6 2 AlInGaP

TLMO1000-GS08 Soft orange 3.55 7.5 - 2 600 605 609 2 - 1.8 2.6 2 AlInGaP

TLMY1000-GS08 Yellow 3.55 7.5 - 2 580 588 595 2 - 1.8 2.6 2 AlInGaP

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

TLMS1000, TLMO1000, TLMY1000

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Reverse voltage

(1)

12 V

DC Forward current T

amb

 95 °C I

15 mA

Surge forward current t

 10 μs I

FSM

0.1 A

Power dissipation P

40 mW

Junction temperature T

120 °C

Operating temperature range T

amb

-40 to +100 °C

Storage temperature range T

stg

-40 to +100 °C

Soldering temperature acc. Vishay spec T

260 °C

Thermal resistance junction/ambient mounted on PC board (pad size > 5 mm

thJA

500 K/W

Summary of content (10 pages)

PAGE 1
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors Low Current 0603 SMD LED FEATURES • Smallest SMD package 0603 with exceptional brightness 1.6 mm x 0.8 mm x 0.
PAGE 2
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLMS1000, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 2 mA IV 1.8 4 - mcd Dominant wavelength IF = 2 mA d 624 628 636 nm Peak wavelength IF = 2 mA p - 640 - nm deg Angle of half intensity IF = 2 mA  - ± 80 - Forward voltage IF = 2 mA VF - 1.8 2.
PAGE 3
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION LUMINOUS INTENSITY (mcd) GROUP MIN. MAX. G1 1.80 2.24 G2 2.24 2.80 H1 2.80 3.55 H2 3.55 4.50 J1 4.50 5.60 J2 5.60 7.10 K1 7.10 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups.
PAGE 4
TLMO1000, TLMS1000, TLMY1000 www.vishay.com 10 IF = 2 mA yellow I F - Forward Current (mA) I Vrel - Relative Luminous Intensity 2.4 orange 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 20 0 Vishay Semiconductors 0.1 20 40 60 80 100 Tamb - Ambient Temperature (°C) 19139 20 40 60 80 λ d - Dominant Wavelength (nm) V F - Forward Voltage (V) 1 0.1 19128 10 Fig. 7 - Relative Luminous Intensity vs. Forward Current Rev. 2.0, 27-Sep-13 2.5 3 yellow 0.6 0.4 0.2 0 - 0.2 - 0.4 - 0.6 - 0.
PAGE 5
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors I Vrel - Relative Luminous Intensity 2.4 10 IF = 2 mA yellow red I F - Forward Current (mA) 2.0 1.6 1.2 0.8 0.4 0.1 0 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 19141 1 1 Fig. 11 - Relative Luminous Intensity vs. Ambient Temperature 1 λ d - Dominant Wavelength (nm) IF = 2 mA V F - Forward Voltage (V) 2.1 2.0 1.9 1.8 1.7 1.6 - 20 0 20 40 60 80 red 1 0.1 19129 1 10 IF - Forward Current (mA) Fig.
PAGE 6
TLMO1000, TLMS1000, TLMY1000 2.4 2.2 red 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 20 0 Vishay Semiconductors 2.00 IF = 2 mA 1.95 V F - Forward Voltage (V) I Vrel - Relative Luminous Intensity www.vishay.com 1.90 1.85 1.80 1.75 1.70 1.65 20 40 60 80 100 Tamb - Ambient Temperature (°C) 19142 IF = 2 mA red Fig. 17 - Relative Luminous Intensity vs. Ambient Temperature 1.60 - 20 19145_1 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 18 - Forward Voltage vs.
PAGE 7
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors 0.75 ± 0.05 0.2 ± 0.02 TAPE DIMENSIONS in millimeters 1.75 ± 0.05 C A Polarity Technical drawings according to DIN specifications Not indicated tolerances ± 0.05 Material: Conductive black PC 4 ± 0.1 2 ± 0.05 0.95 ± 0.05 Ø 0.5 ± 0.05 1.75 ± 0.1 Direction of pulling out 4 ± 0.1 Ø 1.5 + 0.1 3.5 ± 0.05 + 0.3 8 - 0.1 Drawing-No.: 9.700-5290.01-4 Issue: 3; 24.09.13 Rev. 2.
PAGE 8
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 19426 DRY PACKING SOLDERING PROFILE The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. IR Reflow Soldering Profile for lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level 2 300 Temperature (°C) max. 260 °C 245 °C 255 255 °C 240 °C 217 °C 250 Aluminum bag 200 Label max. 30 s 150 max. 100 s max. 120 s 100 max.
PAGE 9
TLMO1000, TLMS1000, TLMY1000 www.vishay.com Vishay Semiconductors FINAL PACKING ESD PRECAUTION The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging.
PAGE 10
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.