Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesLED wired Red Rectangular 2.5 x 5 mm 1.5 mcd 50 ° 20 mA 2 V TLSR5100

TELEFUNKEN Semiconductors

TLS.510.

Rev. A1: 01.06.1995 1 (8)

Symbol LED, 2.5 x 5 mm Flat Tinted Top Diffused Package

Color Type Technology Angle of Half Intensity

Red TLSH510. GaAsP on GaP

Yellow TLSY510. GaAsP on GaP

Green TLSG510. GaP on GaP

Description

This series was developed for use as compact surface dis-

play. It is housed in a 2.5x5 mm rectangular molded

package. This device has a flat tinted, top diffused pack-

age for uniform brightness when used in panels.

The symbol LEDs are available in three bright colors:

high efficiency red, yellow and green.

Features

Choice of three bright colors

Uniform illumination

Luminous intensity selected into groups

Suitable for DC and pulse operation

Flat light emitting surface

Direct symbol indication is possible

Yellow and green color categorized

Wide viewing angle

96 11497

Applications

Status lights

Background illumination

Maintenance lights

Indicator of audio and visual equipment

Off / On indicator

Readout lights

Legend lights

Illumination of moving boards

Summary of content (8 pages)

PAGE 1
TLS.510. TELEFUNKEN Semiconductors Symbol LED, 2.5 x 5 mm Flat Tinted Top Diffused Package Color Red Yellow Green Type TLSH510. TLSY510. TLSG510. Technology GaAsP on GaP GaAsP on GaP GaP on GaP Angle of Half Intensity ±ö 50° Description This series was developed for use as compact surface display. It is housed in a 2.5x5 mm rectangular molded package. This device has a flat tinted, top diffused package for uniform brightness when used in panels.
PAGE 2
TLS.510. TELEFUNKEN Semiconductors Absolute Maximum Ratings Tamb = 25°C, unless otherwise specified TLSH510. ,TLSY510. ,TLSG510.
PAGE 3
TLS.510. TELEFUNKEN Semiconductors Green (TLSG510. ) Parameter Luminous intensity y Test Conditions IF = 10 mA,, IVmin/IVmax ≥ 0.5 Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type TLSG5100 TLSG5101 Symbol IV IV ld lp ϕ VF VR Cj Min 0.4 1 562 Typ 1 2 Max Unit mcd mcd nm nm deg V V pF 575 565 ±50 2.
PAGE 4
TLS.510. TELEFUNKEN Semiconductors 10 Iv rel – Relative Luminous Intensity 1000 IF – Forward Current ( mA ) Red 100 tp/T=0.001 tp=10ms 10 1 0.1 2 4 6 8 0.1 10 VF – Forward Voltage ( V ) 96 11593 1 100 10 IF – Forward Current ( mA ) 96 11596 Figure 5. Forward Current vs. Forward Voltage Figure 8. Relative Luminous Intensity vs. Forward Current 1.6 1.2 Red Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 1 0.01 0 1.2 0.8 0.4 Red 1.0 0.8 0.6 0.4 0.
PAGE 5
TLS.510. TELEFUNKEN Semiconductors 1.2 Yellow Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 1.6 1.2 0.8 0.4 0 20 40 60 80 0.6 0.4 0.2 0 550 100 Tamb – Ambient Temperature ( °C ) 95 10031 570 590 610 630 650 l – Wavelength ( nm ) 95 10039 Figure 11. Rel. Luminous Intensity vs. Ambient Temperature Figure 14. Relative Luminous Intensity vs. Wavelength 2.4 1000 Yellow 2.0 IF – Forward Current ( mA ) Iv rel – Relative Luminous Intensity 0.
PAGE 6
TLS.510. TELEFUNKEN Semiconductors 1.2 Green Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 2.4 2.0 1.6 1.2 0.8 0.4 Green 1.0 0.8 0.6 0.4 0.2 0 95 10263 10 20 50 1 0.5 0.2 100 0.1 200 500 IF(mA) 0.05 0.02 tp/T Figure 17. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle 0 520 95 10038 540 560 580 600 620 l – Wavelength ( nm ) Figure 19. Relative Luminous Intensity vs. Wavelength Iv rel – Relative Luminous Intensity 10 Green 1 0.1 0.
PAGE 7
TELEFUNKEN Semiconductors TLS.510. Dimensions in mm 95 11326 Rev. A1: 01.06.
PAGE 8
TLS.510. TELEFUNKEN Semiconductors Ozone Depleting Substances Policy Statement It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.