Datasheet

TMCM
www.vishay.com
Vishay Polytech
Revision: 26-Oct-17
7
Document Number: 40178
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 V
DC
AT + 85 °C, 16 V
DC
AT +125 °C
0.68 A TMCMA1E684(1)TRF 0.5 4 9.7 0.090
1.0 A TMCMA1E105(1)TRF 0.5 4 6.6 0.109
1.5 A TMCMA1E155(1)TRF 0.5 6 4.4 0.133
2.2 A TMCMA1E225(1)TRF 0.6 6 4.4 0.133
2.2 B TMCMB1E225(1)TRF 0.6 6 3.9 0.157
3.3 A TMCMA1E335(1)TRF 0.8 6 2.8 0.167
3.3 B TMCMB1E335(1)TRF 0.8 6 3.9 0.157
4.7 A TMCMA1E475MTRF 1.2 6 6.6 0.109
4.7 B TMCMB1E475(1)TRF 1.2 6 2.8 0.185
6.8 B TMCMB1E685(1)TRF 1.7 8 2.8 0.185
6.8 C TMCMC1E685(1)TRF 1.7 8 1.7 0.243
10 B TMCMB1E106(1)TRF 2.5 8 2.2 0.209
10 C TMCMC1E106(1)TRF 2.5 8 1.7 0.243
15 C TMCMC1E156(1)TRF 3.8 8 1.7 0.243
15 E TMCME1E156(1)TRF 3.8 8 0.9 0.365
22 C TMCMC1E226(1)TRF 5.5 8 1.1 0.302
22 E TMCME1E226(1)TRF 5.5 8 0.9 0.365
33 E TMCME1E336(1)TRF 8.3 8 0.9 0.365
47 E TMCME1E476(1)TRF 11.8 8 0.9 0.365
35 V
DC
AT + 85 °C, 22 V
DC
AT +125 °C
0.47 A TMCMA1V474(1)TRF 0.5 4 16.5 0.069
0.68 A TMCMA1V684(1)TRF 0.5 4 9.7 0.090
1.0 A TMCMA1V105(1)TRF 0.5 4 6.6 0.109
1.5 A TMCMA1V155(1)TRF 0.5 6 4.4 0.133
1.5 B TMCMB1V155(1)TRF 0.5 6 3.9 0.157
2.2 A TMCMA1V225MTRF 0.8 8 4.4 0.133
2.2 B TMCMB1V225(1)TRF 0.8 6 5.5 0.132
3.3 B TMCMB1V335(1)TRF 1.2 6 3.9 0.157
4.7 C TMCMC1V475(1)TRF 1.6 6 2.8 0.189
6.8 C TMCMC1V685(1)TRF 2.4 6 1.7 0.243
10 C TMCMC1V106(1)TRF 3.5 8 1.7 0.243
10 E TMCME1V106(1)TRF 3.5 8 1.1 0.330
15 E TMCME1V156(1)TRF 5.3 8 0.9 0.365
22 E TMCME1V226(1)TRF 7.7 8 0.9 0.365
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +85 °C)
CAPACITOR VOLTAGE RATING OPERATING VOLTAGE
2.5 1.2
4.0 2.0
6.3 (7.0) 3.1 (3.5)
10 5.0
16 8.0
20 10.0
25 12.5
35 17.5
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C, 120 Hz
(%)
MAX. ESR
AT +25 °C, 100 kHz
()
MAX. RIPPLE,
100 kHz I
RMS
(A)
Note
• Part number definition:
(1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M”