Datasheet

ManualsBrandsVishay ManualsDiodesESD Protection Diode 3A 5V 45W LLP1006-2L

VBUS051BD-HD1

www.vishay.com

Vishay Semiconductors

Rev. 2.6, 03-Jan-2019

Document Number: 81785

For technical questions, contact: ESDprotection@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Low Capacitance, Single-Line ESD Protection Diode

MARKING (example only)

Bar = cathode marking

Y = type code (see table below)

X = date code

DESIGN SUPPORT TOOLS

FEATURES

• Ultra compact LLP1006-2L package

• Low package profile < 0.4 mm

• 1-line ESD protection

• High surge current acc. IEC 61000-4-5

PPM

> 3 A

• Low leakage current I

< 0.1 μA

• Low load capacitance C

= 0.9 pF

• ESD immunity acc. IEC 61000-4-2

± 15 kV contact discharge

± 15 kV air discharge

• Soldering can be checked by standard vision inspection;

no X-ray necessary

• Pin plating NiPdAu (e4) no whisker growth

• e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)

• PATENT(S): www.vishay.com/patents

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912



PATENT(S): www.vishay.com/patents

This Vishay product is protected by one or more United States and international patents.

20855

20856

21121

click logo to get started

Available

Models

ORDERING INFORMATION

DEVICE NAME ORDERING CODE

TAPED UNITS PER REEL

(8 mm TAPE ON 7" REEL)

MINIMUM ORDER QUANTITY

VBUS051BD-HD1 VBUS051BD-HD1-GS08 8000 8000

PACKAGE DATA

DEVICE NAME

PACKAGE

NAME

TYPE

CODE

WEIGHT

MOLDING COMPOUND

FLAMMABILITY RATING

MOISTURE

SENSITIVITY LEVEL

SOLDERING CONDITIONS

VBUS051BD-HD1 LLP1006-2L A 0.72 mg UL 94 V-0

MSL level 1

(according J-STD-020)

Peak temperature max. 260 °C

ABSOLUTE MAXIMUM RATINGS VBUS051BD-HD1

PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT

Peak pulse current Acc. IEC 61000-4-5; t

= 8/20 μs; single shot I

PPM

Peak pulse power Acc. IEC 61000-4-5; t

= 8/20 μs; single shot P

45 W

ESD immunity

Contact discharge acc. IEC 61000-4-2; 10 pulses

ESD

± 15 kV

Air discharge acc. IEC 61000-4-2; 10 pulses ± 15 kV

Operating temperature Junction temperature T

-55 to +145 °C

Storage temperature T

STG

-55 to +150 °C

Summary of content (6 pages)

PAGE 1
VBUS051BD-HD1 www.vishay.com Vishay Semiconductors Low Capacitance, Single-Line ESD Protection Diode FEATURES • Ultra compact LLP1006-2L package • Low package profile < 0.4 mm • 1-line ESD protection 1 2 • High surge current acc. IEC 61000-4-5 IPPM > 3 A 20856 • Low leakage current IR < 0.1 μA 20855 • Low load capacitance CD = 0.9 pF • ESD immunity acc.
PAGE 2
VBUS051BD-HD1 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS051BD-HD1  (Ratings at 25 °C ambient temperature, unless otherwise specified) PARAMETER Protection paths TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 1 lines V Reverse stand-off voltage Max. reverse working voltage VRWM - - 5 Reverse voltage At IR = 0.
PAGE 3
VBUS051BD-HD1 www.vishay.com Vishay Semiconductors 2.5 16 f = 1 MHz 14 Positive surge 12 2 8 1.5 VC (V) CD (pF) 10 1 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) 6 4 VC 2 0 0.5 -2 Negative surge -4 -6 0 0 1 2 3 4 5 0 6 20882 VR (V) 21421 Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR 2 3 IPP (A) Fig. 6 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 100 16 Acc. IEC 61000-4-2 + 200 V contact discharge 14 10 12 VC-ESD (V) IF (mA) 1 1 0.
PAGE 4
VBUS051BD-HD1 www.vishay.com Vishay Semiconductors 100 Acc. IEC 61000-4-2 + 8 kV contact discharge 80 VC-ESD (V) 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 90 t (ns) 21422 Fig. 9 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) 20 0 -20 VC-ESD (V) -40 Acc. IEC 61000-4-2 - 8 kV contact discharge -60 -80 -100 -120 -140 -160 -10 0 10 20 30 40 50 60 70 80 90 t (ns) 21423 Fig. 10 - Typical Clamping Performance at - 8 kV Contact Discharge (acc.
PAGE 5
VBUS051BD-HD1 www.vishay.com Vishay Semiconductors 0.25 [0.010] 0.15 [0.006] PACKAGE DIMENSIONS in millimeters (inches) LLP1006-2L 0.65 [0.026] 0.55 [0.022] Orientation identification 0.05 [0.002] 0 [0.000] 0.4 [0.016] 0.33 [0.013] 0.45 [0.018] 0.35 [0.014] 0.125 [0.005] ref. 0.55 [0.022] 0.45 [0.018] 0.3 [0.012] 0.2 [0.008] 1.05 [0.041] 0.95 [0.037] 1 [0.039] Solder resist mask 0.2 [0.008] 0.5 [0.020] 0.6 [0.024] Foot print recommendation: Solder pad 0.5 [0.020] 0.05 [0.002] 0.25 [0.
PAGE 6
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.