Datasheet

ManualsBrandsVISHAY ManualsDisplaysSeven-segment display Green 10 mm 2 V No. of digits: 1

VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0

www.vishay.com

Vishay Semiconductors

Rev. 1.2, 29-Nov-13

Document Number: 84196

For technical questions, contact: LED@Vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard 7-Segment SMD Display 10 mm

DESCRIPTION

The VDM.10.0 series are 10 mm SMD seven segment LED

displays in a very compact package.

The devices utilize AlInGaP on GaAs chip technology.

PRODUCT GROUP AND PACKAGE DATA

• Product group: Display

•Package: 10 mm

• Product series: SMD

• Angle of half intensity: ± 50°

FEATURES

• Evenly lighted segments

• Grey package surface

• Untinted segments

• Luminous intensity categorized

• Yellow, green, and soft orange categorized for

color

• Wide viewing angle

• Suitable for DC and high peak current

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

•Panel meters

• Test- and measure-equipment

• Point-of-sale terminals

• Control units

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(μcd)

(mA)

WAVELENGTH

(nm)

(mA)

FORWARD VOLTAGE

(V)

(mA)

CIRCUITRY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VDMR10A0 Super red 180 650 - 1 - 631 - 20 - 2.0 2.6 20 Common anode

VDMR10C0 Super red 180 650 - 1 - 631 - 20 - 2.0 2.6 20 Common cathode

VDMO10A0 Soft orange 180 650 - 1 - 605 - 20 - 2.0 2.6 20 Common anode

VDMO10C0 Soft orange 180 650 - 1 - 605 - 20 - 2.0 2.6 20 Common cathode

VDMY10A0 Yellow 1100 2750 - 1 - 589 - 20 - 2.0 2.6 20 Common anode

VDMY10C0 Yellow 1100 2750 - 1 - 589 - 20 - 2.0 2.6 20 Common cathode

VDMG10A0 Green 110 400 - 1 - 572 - 20 - 2.0 2.6 20 Common anode

VDMG10C0 Green 110 400 - 1 - 572 - 20 - 2.0 2.6 20 Common cathode

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Power dissipation per segment P

70 mW

Peak forward current per segment

(frequency 1 kHz, 10 % duty cycle)

60 mA

Continous forward current per segment I

25 mA

Forward current derating from 25 °C 0.28 mA/°C

Operating temperature range T

amb

-35 to +105 °C

Storage temperature range T

stg

-35 to +105 °C

Iron soldering conditions: 1/16" below seating plane for 3 s at 260 °C

Summary of content (8 pages)

PAGE 1
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors Standard 7-Segment SMD Display 10 mm FEATURES • Evenly lighted segments • Grey package surface • Untinted segments • Luminous intensity categorized • Yellow, green, and soft orange categorized for color • Wide viewing angle • Suitable for DC and high peak current DESCRIPTION The VDM.10.0 series are 10 mm SMD seven segment LED displays in a very compact package.
PAGE 2
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VDMR10A0, VDMR10C0, SUPER RED PARAMETER TEST CONDITION IF = 1 mA Luminous intensity (1) IF = 10 mA PART VDMR10A0 VDMR10C0 VDMR10A0 VDMR10C0 SYMBOL MIN. TYP. MAX.
PAGE 3
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VDMG10A0, VDMG10C0, GREEN PARAMETER TEST CONDITION IF = 1 mA Luminous intensity (1) IF = 10 mA PART SYMBOL MIN. TYP. MAX.
PAGE 4
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 I F - Forward Current (mA) IF - Forward Current (mA) 30 25 20 15 10 10 5 0 0 20 40 60 80 100 1 1.0 120 Tamb - Ambient Temperature (°C) green 2.5 3.0 3.5 Fig. 4 - Forward Current vs. Forward Voltage 100 yellow soft orange super red Ipeak - Peak Current (mA) 1.0 Irel - Relative Intensity 2.0 V F - Forward Voltage (V) Fig.
PAGE 5
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6. 2 3.75 1. 2 10 0.6 1.9 6 10 5 1 4.5 10 15 13 6 1 10° 1.55 ±0.1 9.8 Ø1.2 5 R0.65 1 Plastic pins’ burr max. 0.14 mm PART NO DATE CODE BIN CODE 3, 8 (C) 3, 8 (A) A F G E B A B C D E F G DP A B C D E F G DP C D DP 7 6 4 2 1 9 10 5 7 6 4 2 1 9 10 5 Tolerances are ± 0.25 mm unless otherwise mentioned technical drawings according to DIN specifications Drawing-No.: 6.
PAGE 6
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters TAPE IN BOX Rev. 1.2, 29-Nov-13 Document Number: 84196 6 For technical questions, contact: LED@Vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 7
VDMR10.0, VDMO10.0, VDMY10.0, VDMG10.0 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example only) RECOMMENDED SOLDER PAD 4 x 1.9 = 7.6 A 3 B C D L E I G F H M K 2D barcode Vishay part number Quantity PTC = selection code (binning) Code of manufacturing plant Batch = date code: year/week/plant code Region code SL = sales location Terminations finishing Lead (Pb)-free symbol Halogen-free symbol RoHS symbol 15 A) B) C) D) E) F) G) H) I) K) L) M) 1.
PAGE 8
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.