Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED PLCC2 Green 1.6 mcd 120 ° 2 mA 1.9 V

VLMC310.

www.vishay.com

Vishay Semiconductors

Rev. 1.5, 26-Sep-13

Document Number: 81649

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Low Current SMD LED PLCC-2

DESCRIPTION

These new devices have been designed to meet the

increasing demand for low current SMD LEDs.

The package of the VLMC310. is the PLCC-2 (equivalent to

a size B tantalum capacitor).

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LED with exceptional brightness

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with IR reflow, vapor phase and

wave solder processes according to

CECC 00802 and J-STD-020

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: Excellent for coupling to

light pipes and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

 1.6

• Preconditioning according to JEDEC

level 2a

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: Backlighting in dashboards and switches

• Telecommunication: Indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight for battery driven equipment

• Small indicator for outdoor applications

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

19225

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMC3100-GS08 Green 0.71 1.6 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP

VLMC3100-GS18 Green 0.71 1.6 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP

VLMC3101-GS08 Green 1.12 1.6 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP

VLMC3101-GS18 Green 1.12 1.6 - 2 562 - 575 2 - 1.9 2.4 2 GaP on GaP

Summary of content (7 pages)

PAGE 1
VLMC310. www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 • Available in 8 mm tape DESCRIPTION • Low profile package These new devices have been designed to meet the increasing demand for low current SMD LEDs.
PAGE 2
VLMC310. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)  VLMC310. SYMBOL VALUE Reverse voltage (1) PARAMETER TEST CONDITION VR 6 V DC forward current IF 7 mA IFSM 0.
PAGE 3
VLMC310. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.6 Iv rel - Relative Luminous Intensity IF - Forward Current (mA) 10 8 6 4 2 0 1.2 0.8 0.4 I F = 2 mA 0 20 40 60 80 100 10° ϕ - Angular Displacement 40° 1.0 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 80 100 2.4 30° 50° 60 Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature 20° 0.9 40 Tamb - Ambient Temperature (°C) 95 10057 Fig. 1 - Forward Current vs.
PAGE 4
VLMC310. www.vishay.com Vishay Semiconductors 1.2 green Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0 520 540 560 580 620 600 λ - Wavelength (nm) 95 10038 Fig. 7 - Relative Intensity vs. Wavelength PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications C A 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.15 Mounting Pad Layout 4 2.6 (2.8) 1.
PAGE 5
VLMC310. www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3..-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.
PAGE 6
VLMC310. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY • Storage temperature 10 °C to 30 °C 37 B C D E F G 20127 • Storage humidity  60 % RH max.
PAGE 7
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.