Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED SMD 2 Green 14 mcd 120 ° 10 mA 2.1 V

VLMG21..

www.vishay.com

Vishay Semiconductors

Rev. 1.5, 28-Nov-14

Document Number: 81750

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard Mini SMD LED

DESCRIPTION

The MiniLED series has been designed in a small white SMT

package. The feature of the device is the very small package

2.3 mm x 1.3 mm x 1.4 mm. The MiniLED is an obvious

solution for small-scale, high-power products that are

expected to work reliably in an arduous environment. This is

often the case in automotive and industrial application of

course.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD MiniLED

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LEDs with exceptional brightness

• Luminous intensity categorized

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• IR reflow soldering

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: excellent for coupling to

light pipes and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

≤ 1.6

• Preconditioning according to JEDEC

level 2a

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: backlighting in dashboards and switches

• Telecommunication: indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video

equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

Note

(1)

Driving the LED in reverse direction is suitable for a short term application

19226

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMG21K1L2-GS08 Green 7.1 - 18 10 562 568 575 10 - 2.1 2.8 10 GaP on GaP

VLMG21J2L1-GS08 Green 5.6 - 14 10 562 568 575 10 - 2.1 2.8 10 GaP on GaP

VLMG21K2M1-GS08 Green 9 - 22.4 10 562 568 575 10 - 2.1 2.8 10 GaP on GaP

VLMG21J2M1-GS08 Green 5.6 - 22.4 10 562 568 575 10 - 2.1 2.8 10 GaP on GaP

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

VLMG21..

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Reverse voltage

(1)

DC forward current T

amb

≤ 60 °C I

30 mA

Surge forward current t

≤ 10 μs I

FSM

0.5 A

Power dissipation P

95 mW

Junction temperature T

+100 °C

Operating temperature range T

amb

-40 to +100 °C

Storage temperature range T

stg

-40 to +100 °C

Thermal resistance junction/ambient Mounted on PC board (pad size > 5 mm

thJA

480 K/W

Summary of content (9 pages)

PAGE 1
VLMG21.. www.vishay.com Vishay Semiconductors Standard Mini SMD LED FEATURES • SMD LEDs with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • IR reflow soldering • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity ratio in one packaging IVmax./IVmin. ≤ 1.
PAGE 2
VLMG21.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMG21.., GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 10 mA VLMG21J2L1 IV 5.6 - 14 mcd IF = 10 mA VLMG21K2M1 IV 9 - 22.4 mcd IF = 10 mA VLMG21J2M1 IV 5.6 - 22.4 mcd IF = 10 mA VLMG21K1L2 IV 7.
PAGE 3
VLMG21.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 I v rel - Relative Luminous Intensity IF - Forward Current (mA) 60 50 40 30 20 10 green 1 0.1 0 0.01 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10905 10° 2.0 40° 0.9 50° 0.8 60° 70° 80° I v rel - Relative Luminous Intensity IVrel - Relative Luminous Intensity 30° 1.0 100 Fig. 4 - Relative Luminous Intensity vs. Forward Current 20° 0.
PAGE 4
VLMG21.. www.vishay.com Vishay Semiconductors SOLDERING PROFILE IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 19885 200 250 300 max. 2 cycles allowed Fig. 7 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) PACKAGE DIMENSIONS in millimeters 2.
PAGE 5
VLMG21.. www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters 16938 Rev. 1.5, 28-Nov-14 Document Number: 81750 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 6
VLMG21.. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 16939 LEADER AND TRAILER DIMENSIONS in millimeters Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 Note • GS08 = 3000 pcs Rev. 1.5, 28-Nov-14 Document Number: 81750 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 7
VLMG21.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL COVER TAPE PEEL STRENGTH According to DIN EN 60286-3 106 A 0.1 N to 1.3 N H 300 mm/min ± 10 mm/min VISHAY 165° to 180° peel angle 37 LABEL Standard bar code labels for finished goods B C D E F G The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area.
PAGE 8
VLMG21.. www.vishay.com Vishay Semiconductors DRY PACKING ESD PRECAUTION The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.