Datasheet

ManualsBrandsVishay ManualsLEDsSMD LED 575nm PLCC-2 18mcd 30mA

VLMG31..

www.vishay.com

Vishay Semiconductors

Rev. 1.6, 03-Nov-15

Document Number: 81323

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard SMD LED PLCC-2

DESCRIPTION

These devices have been designed to meet the increasing

demand for surface mounting technology.

The package of the VLMG31-series is the PLCC-2.

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LEDs with exceptional brightness

• Luminous intensity categorized

• EIA and ICE standard package

• Available in 8 mm tape

• Low power consumption

• Low profile package

• Compatible with IR reflow, vapor phase and

wave solder processes according to

CECC 00802 and J-STD-020

• Compatible with automatic placement

equipment

• Non-diffused lens: excellent for coupling to light pipes and

backlighting

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

≤ 1.6

• Preconditioning according to JEDEC

level 2a

• ESD-withstand voltage: up to 2 kV according to

JESD22-A114-B

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: backlighting in dashboards and switches

• Telecommunication: indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

948553

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMG31K1L2-GS08 Green 7.1 12 18 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

VLMG31K1L2-GS18 Green 7.1 12 18 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

VLMG31K1M2-GS08 Green 7.1 12 28 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

VLMG31K1M2-GS18 Green 7.1 12 28 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

VLMG31L1M2-GS08 Green 11.2 13.7 28 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

VLMG31L1M2-GS18 Green 11.2 13.7 28 10 562 572 575 10 - 2.2 2.8 20 GaP on GaP

Summary of content (7 pages)

PAGE 1
VLMG31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LEDs with exceptional brightness • Luminous intensity categorized • EIA and ICE standard package • Available in 8 mm tape • Low power consumption • Low profile package 948553 • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 DESCRIPTION These devices have been designed to meet the increasing demand for surface mounting technology.
PAGE 2
VLMG31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMG31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 0.
PAGE 3
VLMG31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 1.2 50 1.0 Irel - Relative Intensity IF - Forward Current (mA) green 40 30 20 10 0.8 0.6 0.4 0.2 0 0 20 40 60 80 0 100 520 Tamb - Ambient Temperature (°C) 95 10905 Fig. 1 - Forward Current vs. Ambient Temperature 580 600 620 100 green I F - Forward Current (mA) Tamb < 60 °C tp/T = 0.005 IF - Forward Current (mA) 560 λ - Wavelength (nm) Fig.
PAGE 4
VLMG31.. www.vishay.com Vishay Semiconductors I v rel - Relative Luminous Intensity 2.0 green 1.6 1.2 0.8 0.4 0 0 95 10320 20 40 60 80 100 T amb - Ambient Temperature (°C) Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications A C 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.
PAGE 5
VLMG31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.
PAGE 6
VLMG31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY • Storage temperature 10 °C to 30 °C 37 B C D E F G • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering.
PAGE 7
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.