Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED 1608 Orange 90 mcd 130 ° 20 mA 2 V

VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310

www.vishay.com

Vishay Semiconductors

Rev. 1.3, 30-Apr-13

Document Number: 82437

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Highbright 0603 ChipLED

DESCRIPTION

The new ChipLED series have been designed in the smallest

SMD package. This innovative ChipLED technology opens

the way to 

• smaller products of higher performance 

• more design in flexibility 

• enhanced applications

The 0603 LED is an obvious solution for small-scale, high

brightness products that are expected to work reliably in an

arduous environment.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD 0603 ChipLED

• Product series: standard

• Angle of half intensity: ± 65°

FEATURES

• Super thin ChipLED with exceptional brightness

1.6 mm x 0.8 mm x 0.8 mm (L x W x H)

• High reliability PCB based

• Wavelength (465 to 475) nm (blue), typ. 525 nm

(true green), typ. 571 nm (yellow green), (584.5

to 597) nm (yellow), typ. 605 nm (soft orange),

typ. 631 nm (super red)

• InGaN blue available with protection diode,

device type VLMB1310 with HBM 8000 V

• AllnGaP and InGaN technology

• Viewing angle: Extremely wide 130°

• Grouping parameter: Luminous intensity, wavelength, V

• Available in 8 mm tape on 7" diameter reel

• Compatible to IR reflow soldering

• Preconditioning according to JEDEC level 3

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Backlight keypads

• Navigation systems

• Cellular phone displays

• Displays for industrial control systems

• Miniaturized color effects

• Traffic displays

PARTS TABLE

PART COLOR

LUMINOUS

INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD

VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMS1300-GS08 Super red 18 54 - 20 - 631 - 20 - 2.0 2.4 20 AlInGaP

VLMO1300-GS08 Soft orange 45 90 - 20 - 605 - 20 - 2.0 2.4 20 AlInGaP

VLMY1300-GS08 Yellow 28 - 180 20 584.5 - 597 20 1.8 - 2.4 20 AlInGaP

VLMG1300-GS08 Yellow green 18 35 - 20 - 571 - 20 - 2.0 2.4 20 AlInGaP

VLMTG1300-GS08 True green 71 - 450 20 - 525 - 20 2.8 3.2 3.6 20 InGaN

VLMB1300-GS08 Blue 28 - 180 20 465 - 475 20 2.8 - 3.8 20 InGaN

VLMB1310-GS08 Blue 28 - 180 20 465 - 475 20 2.8 - 3.8 20 InGaN

Summary of content (13 pages)

PAGE 1
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors Highbright 0603 ChipLED FEATURES • Super thin ChipLED with exceptional brightness 1.6 mm x 0.8 mm x 0.8 mm (L x W x H) • High reliability PCB based • Wavelength (465 to 475) nm (blue), typ. 525 nm (true green), typ. 571 nm (yellow green), (584.5 to 597) nm (yellow), typ. 605 nm (soft orange), typ.
PAGE 2
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMS1300, VLMO1300, VLMY1300, VLMG1300 (AlInGaP technology) PARAMETER SYMBOL VALUE Reverse voltage (1) VR 5 V DC forward current IF 30 mA 1/10 duty cycle, 0.
PAGE 3
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY1300, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 20 mA IV 28 - 180 mcd Dominant wavelength IF = 20 mA d 584.
PAGE 4
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION COLOR CLASSIFICATION LUMINOUS INTENSITY (mcd) GROUP M N MIN. MAX. 18 28 28 P 45 Q 71 COLOR GROUP DOMINANT WAVELENGTH (nm) MIN. MAX. 45 H 584.5 587.5 71 J 587.5 589.5 K 589.5 592 592 594.5 112 Yellow R 112 180 L S 180 280 M 594.5 597 450 C 567.5 570.5 D 570.5 573.5 E 573.5 576.
PAGE 5
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 50 super red, soft orange, yellow, yellow green 30 IF - Forward Current (mA) IF - Forward Current (mA) 35 25 20 15 true green, blue 10 5 0 0 10 20 30 40 50 60 70 80 yellow 40 30 20 10 0 1.2 90 Tamb - Ambient Temperature (°C) IF - Forward Current (mA) IF - Forward Current (mA) super red 3.2 30 20 10 1.6 2.
PAGE 6
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors 1.2 super red soft orange 2.0 1.0 I rel - Relative Intensity Irel - Relative Luminous Intensity 2.5 1.5 1.0 0.5 10 20 30 40 50 IF - Forward Current (mA) 0.2 620 640 660 680 700 λ- Wavelength (nm) Fig. 10 - Relative Intensity vs. Wavelength (super red) 2.5 1.2 soft orange yellow 2.0 1.0 I rel - Relative Intensity Irel - Relative Luminous Intensity 0.4 96 12075-1 Fig.
PAGE 7
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors 1.2 yellow green true green 1.0 1.0 Irel - Relative Intensity IV rel - Relative Luminous Intensity 1.2 0.8 0.6 0.4 0.8 0.6 0.4 0.2 0.2 0.0 510 530 550 570 590 λ - Wavelength (nm) 18648-1 0.0 460 610 Fig. 13 - Relative Intensity vs. Wavelength (yellow green) 620 Fig. 16 - Relative Intensity vs. Wavelength (true green) 50 1.2 blue 1.1 true green, blue 40 1.
PAGE 8
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com 10° 20° 30° 40° 1.0 50° 0.9 60° 0.8 70° 0.7 80° 0.6 0.4 0.2 ϕ - Angular Displacement Irel - Relative Luminous Intensity 0° Vishay Semiconductors 0 Fig. 19 - Relative Luminous Intensity vs. Angular Displacement Ø 60 ± 1 Ø 178 ± 2 Ø 13 REEL DIMENSIONS in millimeters 9.4 ± 1.5 Drawing-No.: 9.800-5122.01-4 Issue: 2; 03.11.11 22611 Rev. 1.
PAGE 9
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters VLMG 13.., VLMY 13.., VLMO 13.., VLMS 13.., VLMB 13.., VLMB131.. 0.9 0.25 A - A (5:1) 8 + 0.3 - 0.1 1.75 ± 0.1 Cathode A A 4 ± 0.1 4 ± 0.1 Ø 0.5 2 ± 0.05 User feed direction Ø 1.55 ± 0.05 3.5 ± 0.05 technical drawings according to DIN specifications Drawing-No.: 9.700-5386.01-4 Issue: 1; 17.10.11 22614 Rev. 1.
PAGE 10
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters VLMG 13.., VLMY 13.., VLMO 13.., VLMS 13.. 0.4 Recommended solder pad footprint 0.8 0.7 0.4 1.1 0.8 0.28 0.8 2.3 0.3 0.8 Cathode 1.6 technical drawings according to DIN specifications Not indicated tolerances ± 0.2 Drawing-No.: 6.541-5092.01-4 Issue: 1; 17.10.11 22615 VLMB 131.. 0.4 Recommended solder pad footprint 0.8 0.7 0.4 1.1 0.28 0.8 0.8 2.
PAGE 11
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors VLMB 130., VLMTG 130. 0.3 0.3 0.8 0.77 Recommended solder pad footprint 1.1 0.28 0.8 0.8 2.3 0.8 0.35 Cathode 1.6 technical drawings according to DIN specifications Not indicated tolerances ± 0.2 Drawing-No.: 6.541-5094.01-4 Issue: 1; 17.10.11 22617 SOLDERING PROFILE BAR CODE PRODUCT LABEL (example only) IR Reflow Soldering Profile for lead (Pb)-free Soldering Preconditioning acc.
PAGE 12
VLMS1300, VLMO1300, VLMY1300, VLMG1300, VLMTG1300, VLMB1300, VLMB1310 www.vishay.com Vishay Semiconductors DRY PACKING ESD PRECAUTION The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging.
PAGE 13
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.