Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED SMD 2 Red 9 mcd 120 ° 10 mA 2.1 V

VLMO21.., VLMS21.., VLMY21..

www.vishay.com

Vishay Semiconductors

Rev. 1.5, 28-Nov-14

Document Number: 81233

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard Mini SMD LED

DESCRIPTION

The new MiniLED series has been designed in a small white

SMT package. The feature of the device is the very small

package 2.3 mm x 1.3 mm x 1.4 mm. The MiniLED is an

obvious solution for small-scale, high-power products that

are expected to work reliably in an arduous environment.

This is often the case in automotive and industrial

application of course.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD MiniLED

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LEDs with exceptional brightness

• Luminous intensity categorized

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• IR reflow soldering

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: excellent for coupling to

light pipes and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

≤ 2, optional ≤ 1.6

• Preconditioning according to JEDEC

level 2a

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: backlighting in dashboards and switches

• Telecommunication: indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video

equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

19226

PARTS TABLE

PART COLOR

LUMINOUS

INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD

VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMS2100-GS08 Red 2.8 7.1 - 10 624 628 636 10 - 2.1 3 20 GaAsP on GaP

VLMS21H2K1-GS08 Red 3.55 - 9 10 624 628 636 10 - 2.1 3 20 GaAsP on GaP

VLMS21J2L1-GS08 Red 5.6 - 14 10 624 628 636 10 - 2.1 3 20 GaAsP on GaP

VLMS21H2L1-GS08 Red 3.55 - 14 10 624 628 636 10 - 2.1 3 20 GaAsP on GaP

VLMO2100-GS08 Soft orange 3.55 7.1 - 10 598 605 611 10 - 2.1 3 20 GaAsP on GaP

VLMO21H2K1-GS08 Soft orange 3.55 - 9 10 598 605 611 10 - 2.1 3 20 GaAsP on GaP

VLMO21J2L1-GS08 Soft orange 5.6 - 14 10 598 605 611 10 - 2.1 3 20 GaAsP on GaP

VLMO21H2L1-GS08 Soft orange 3.55 - 14 10 598 605 611 10 - 2.1 3 20 GaAsP on GaP

VLMY2100-GS08 Yellow 3.55 7.1 - 10 581 588 594 10 - 2.2 3 20 GaAsP on GaP

VLMY21H2K1-GS08 Yellow 3.55 - 9 10 581 588 594 10 - 2.2 3 20 GaAsP on GaP

VLMY21J2L1-GS08 Yellow 5.6 - 14 10 581 588 594 10 - 2.2 3 20 GaAsP on GaP

VLMY21H2L1-GS08 Yellow 3.55 - 14 10 581 588 594 10 - 2.2 3 20 GaAsP on GaP

Summary of content (12 pages)

PAGE 1
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors Standard Mini SMD LED FEATURES • SMD LEDs with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • IR reflow soldering • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting 19226 DESCRIPTION • Low power consumption The new MiniLED series has been designed in a small white SMT package.
PAGE 2
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMS21.., VLMO21.., VLMY21.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs Reverse voltage (1) DC forward current Surge forward current UNIT IFSM 0.
PAGE 3
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY21.., YELLOW PARAMETER Luminous intensity (1) TEST CONDITION PARTS SYMBOL MIN. TYP. MAX. IF = 10 mA VLMY2100 IV 3.55 7.1 - UNIT mcd IF = 10 mA VLMY21H2K1 Iς 3.55 - 9 mcd IF = 10 mA VLMY21J2L1 IV 5.6 - 14 mcd IF = 10 mA VLMY21H2L1 IV 3.
PAGE 4
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 40 IF - Forward Current (mA) 35 IV rel - Relative Luminous Intensity 10 Red, Soft Orange, Yellow 30 25 20 15 10 5 super red 1 0.1 0.01 0 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 19902 Fig. 1 - Forward Current vs. Ambient Temperature 0° 10° 1 16638 100 Fig. 4 - Relative Luminous Intensity vs. Forward Current 20° 2.0 40° 1.0 0.
PAGE 5
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors 1.2 100 soft orange 1.0 Irel - Relative Intensity I F - Forward Current (mA) soft orange 10 1 0.8 0.6 0.4 0.2 0 570 0.1 0 1 2 3 4 5 V F - Forward Voltage (V) 95 9990 610 630 650 670 λ - Wavelength (nm) Fig. 10 - Relative Intensity vs. Wavelength 10 100 soft orange - Forward Current (mA) yellow 1 1 F 0.1 10 I I v rel - Relative Luminous Intensity Fig. 7 - Forward Current vs. Forward Voltage 0.01 0.
PAGE 6
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors I v rel - Relative Luminous Intensity 2.0 10 000 yellow IF - Forward Current (mA) 1.2 0.8 0.4 20 40 60 80 100 1000 0.02 0.05 100 0.2 0.5 DC 10 95 9985 T amb - Ambient Temperature (°C) 95 9992 0.01 1 0.01 0 0 Tamb < 60 °C tp/T = 0.005 1.6 Fig. 13 - Relative Luminous Intensity vs. Ambient Temperature 0.1 0.1 1 10 100 tp - Pulse Length (ms) Fig. 15 - Pulse Forward Current vs. Pulse Duration 1.
PAGE 7
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.2 ± 0.1 1.4 ± 0.1 (1.2) 0.1 ± 0.05 0.7 ± 0.1 1.3 ± 0.1 2.05 ± 0.1 0.9 ± 0.1 0.4 ± 0.1 Not indicated tolerances ± 0.2 Cathode mark (0.9) Proposed pad layout (for reference only) 0.8 (1.5) 2.8 Area not flat 1 0.8 technical drawings according to DIN specifications Solder resist Drawing-No.: 6.541-5069.01-4 Issue: 2; 24.11.14 Rev. 1.5, 28-Nov-14 Cu.
PAGE 8
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters 16938 Rev. 1.5, 28-Nov-14 Document Number: 81233 8 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 9
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 16939 LEADER AND TRAILER DIMENSIONS in millimeters Trailer Leader no devices devices no devices End Start min. 200 min. 400 96 11818 Note • GS08 = 3000 pcs BAR CODE PRODUCT LABEL A) Type of component 106 B) Manufacturing plant A C) SEL - Selection code (bin): e.g.: H2 = bode for luminous intensity group 3 = bode for color group H VISHAY 37 D) Date code year / week E) Day code (e.g.
PAGE 10
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors COVER TAPE PEEL STRENGTH LABEL According to DIN EN 60286-3 Standard bar code labels for finished goods 0.1 N to 1.3 N The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses.
PAGE 11
VLMO21.., VLMS21.., VLMY21.. www.vishay.com Vishay Semiconductors RECOMMENDED METHOD OF STORAGE ESD PRECAUTION Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag.
PAGE 12
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.