Datasheet

ManualsBrandsVISHAY ManualsLEDs & AccessoriesSMD LED PLCC3 Green, Red 8 mcd, 10 mcd 120 ° 10 mA 2.2 V, 2 V

VLMV3100

www.vishay.com

Vishay Semiconductors

Rev. 1.3, 16-May-13

Document Number: 81347

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Bicolor SMD LED PLCC-3

DESCRIPTION

These devices have been designed to meet the increasing

demand for surface mounting technology.

The package of the VLMV3100 is the PLCC-3.

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

This SMD device consists of a red and green chip. So it is

possible to choose the color in one device.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-3

• Product series: bicolor

• Angle of half intensity: ± 60°

FEATURES

• SMD LED with exceptional brightness

•Multicolored

• Luminous intensity categorized

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with IR reflow, vapor phase

and wave soldering processes according to

CECC 00802 and J-STD-020

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: Excellent for coupling to light pipes

and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

 1.6

• Preconditioning according to JEDEC level 2a

• ESD-withstand voltage: Up to 2 kV according to

JESD22-A114-B

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: Backlighting in dashboards and switches

• Telecommunication: Indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

19140_1

PARTS TABLE

PART COLOR

LUMINOUS

INTENSITY

(mcd)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD

VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMV3100-GS08 Red 2.8 10 - 10 612 620 625 10 - 2.0 3 20 GaAsP on GaP

VLMV3100-GS08 Green 2.8 8 - 10 562 571 575 10 - 2.2 3 20 GaP on GaP

VLMV3100-GS18 Red 2.8 10 - 10 612 620 625 10 - 2.0 3 20 GaAsP on GaP

VLMV3100-GS18 Green 2.8 8 - 10 562 571 575 10 - 2.2 3 20 GaP on GaP

Summary of content (9 pages)

PAGE 1
VLMV3100 www.vishay.com Vishay Semiconductors Bicolor SMD LED PLCC-3 FEATURES • SMD LED with exceptional brightness • Multicolored • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave soldering processes according to CECC 00802 and J-STD-020 19140_1 DESCRIPTION These devices have been designed to meet the increasing demand for surface mounting technology.
PAGE 2
VLMV3100 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMV3100 TEST CONDITION SYMBOL VALUE Reverse voltage per diode (1) PARAMETER IR = 10 μA VR 6 V DC forward current per diode Tamb  60 °C IF 30 mA tp  10 μs Surge forward current per diode UNIT IFSM 0.
PAGE 3
VLMV3100 www.vishay.com Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION GREEN LIGHT INTENSITY (mcd) STANDARD H J K L M OPTIONAL MIN. MAX. 1 2 1 2 1 2 1 2 1 2 2.8 3.55 4.5 5.6 7.1 9.0 11.2 14.0 18.0 22.4 3.55 4.5 5.6 7.1 9.0 11.2 14.0 18.0 22.4 28.0 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups.
PAGE 4
VLMV3100 www.vishay.com 0° Vishay Semiconductors 10° 20° 100 0.9 50° 0.8 60° 70° 0.7 IF - Forward Current (mA) 40° 1.0 red ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 10 1 80° 0.1 0.6 0.4 0.2 0 0 1 2 3 VF - Forward Voltage (V) 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Fig. 6 - Forward Current vs. Forward Voltage 100 green red 1.0 IF - Forward Current (mA) IV rel - Relative Luminous Intensity 1.2 0.8 0.6 0.4 0.
PAGE 5
VLMV3100 Vishay Semiconductors 2.4 10 IV rel - Relative Luminous Intensity I v rel - Relative Luminous Intensity www.vishay.com green 1 0.1 0.01 1 10 1.2 0.8 0.4 0 95 10321 Fig. 9 - Relative Luminous Intensity vs. Forward Current red 1.6 1.2 0.8 0.4 0 10 1 20 0.5 50 0.2 100 200 0.1 0.05 500 IF (mA) 0.02 tp/T Fig. 12 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Ispec - Specific Luminous Intensity 2.0 I v rel - Relative Luminous Intensity 1.
PAGE 6
VLMV3100 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Mounting Pad Layout area covered with solder resist 4 0.5 2.6 (2.8) 1.2 4 1.6 (1.9) Dimensions: IR and Vaporphase (Wave Soldering) METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) TAPING OF VLM.3... Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion.
PAGE 7
VLMV3100 www.vishay.com Vishay Semiconductors REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 13.00 12.75 max. 260 °C 245 °C 255 255°C°C 250 63.5 60.5 Identification Label: Vishay type group tape code production code quantity Preconditioning acc. to JEDEC level 2a 300 Temperature (°C) 2.5 1.5 IR Reflow Soldering Profile for lead (Pb)-free soldering 10.0 9.0 120° 4.5 3.5 SOLDERING PROFILE 240 °C 217 °C 200 max. 30 s 150 max. 100 s max. 120 s 100 max.
PAGE 8
VLMV3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminium bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY • Storage temperature 10 °C to 30 °C 37 B C D E F G 20164 • Storage humidity  60 % RH max.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.