Datasheet

VLWB9600
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 07-Oct-15
1
Document Number: 81318
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TELUX LED
DESCRIPTION
The VLWB9600 is a clear, non diffused LED for applications
where supreme luminous flux is required.
It is designed in an industry standard 7.62 mm square
package utilizing highly developed InGaN technology.
The supreme heat dissipation of VLWB9600 allows
applications at high ambient temperatures.
All packing units are binned for luminous flux and color to
achieve the most homogenous light appearance in
application.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: TELUX
• Product series: power
• Angle of half intensity: ± 30°
FEATURES
• High luminous flux
• Supreme heat dissipation: R
thJP
is 90 K/W
• High operating temperature:
T
amb
= -40 °C to +100 °C
• Meets SAE and ECE color requirements for the
automobile industry for color red
• Packed in tubes for automatic insertion
• Luminous flux and color categorized for each
tube
• Small mechanical tolerances allow precise
usage of external reflectors or lightguides
• Compatible with wave solder processes according to
CECC 00802 and J-STD-020
• ESD-withstand voltage: up to 2 kV according to
JESD22-A114-B
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Exterior lighting
• Replaces small incandescent lamps
• Traffic signals and signs
Note
(1)
Driving the LED in reverse direction is suitable for a short term application
19232
PARTS TABLE
PART COLOR
LUMINOUS FLUX
(mlm)
at I
F
(mA)
WAVELENGTH
(nm)
at I
F
(mA)
FORWARD VOLTAGE
(V)
at I
F
(mA)
TECHNOLOGY
MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
VLWB9600 Blue 800 1600 - 50 462 470 476 50 - 3.9 4.7 50 InGaN on SiC
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
VLWB9600
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage
(1)
I
R
= 10 μA V
R
5V
DC forward current T
amb
≤ 50 °C I
F
50 mA
Surge forward current t
p
≤ 10 μs I
FSM
0.1 A
Power dissipation P
V
230 mW
Junction temperature T
j
100 °C
Operating temperature range T
amb
-40 to +100 °C
Storage temperature range T
stg
-55 to +100 °C
Soldering temperature
t ≤ 5 s, 1.5 mm from body preheat
temperature 100 °C / 30 s
T
sd
260 °C
Thermal resistance junction / ambient With cathode heatsink of 70 mm
2
R
thJA
200 K/W
Thermal resistance junction / pin R
thJP
90 K/W