Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SOP-4L 80V

VOL617A

www.vishay.com

Vishay Semiconductors

Rev. 2.0, 13-Oct-15

Document Number: 82424

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, 4 Pin LSOP,

Long Creepage Mini-Flat Package

DESCRIPTION

The VOL617A has a GaAs infrared emitting diode emitter,

which is optically coupled to a silicon planar phototransistor

detector, and is incorporated in a 4 pin LSOP wide body

package.

It features a high current transfer ratio, low coupling

capacitance, and high isolation voltage.

The coupling device is designed for signal transmission

between two electrically separated circuits.

FEATURES

• Low profile package

• High collector emitter voltage, V

CEO

= 80 V

• Isolation test voltage, 5000 V

RMS

• Isolation voltage V

IORM

= 1050 V

peak

• Low coupling capacitance

• High common mode transient immunity

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

• Telecom

• Industrial controls

• Battery powered equipment

• Office machines

• Programmable controllers

AGENCY APPROVALS

(All parts are certified under base model VOL617A)

• UL1577, file no. E76222

• cUL CSA 22.2 bulletin 5A, double protection

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

• BSI: EN 60065:2002, EN 60950-1:2006

• FIMKO EN60950-1

• CQC: GB8898-2011, GB4943.1-2011

17295-6

ORDERING INFORMATION

VOL617A-#X001 T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/

PACKAGE

CTR (%)

5 mA

UL, cUL, BSI,

FIMKO, CQC

50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260

4 pin LSOP, mini-flat,

long creepage

VOL617AT VOL617A-1T VOL617A-2T VOL617A-3T VOL617A-4T - -

UL, cUL, BSI, FIMKO,

CQC, VDE (option 1)

50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260

4 pin LSOP, mini-flat,

long creepage

VOL617A-

X001T

VOL617A-

1X001T

VOL617A-

2X001T

VOL617A-

3X001T

VOL617A-

4X001T

VOL617A-

7X001T

VOL617A-

8X001T

LSOP-4

10.2 mm

Summary of content (9 pages)

PAGE 1
VOL617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES • Low profile package A 1 4 C C 2 3 E • High collector emitter voltage, VCEO = 80 V • Isolation test voltage, 5000 VRMS • Isolation voltage VIORM = 1050 Vpeak • Low coupling capacitance • High common mode transient immunity 17295-6 • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
VOL617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT tp < 10 μs VR Pdiss IFSM IF Tj 6 100 1.
PAGE 3
VOL617A www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IC/IF IF = 5 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX.
PAGE 4
VOL617A www.vishay.com Vishay Semiconductors VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor PSO (mW) 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM 100 IR-diode Isi (mA) 50 0 0 0 25 50 75 125 100 t3 ttest t4 150 13930 Tsi - Safety Temperature (°C) tTr = 60 s t1 t2 t stres t Fig. 4 - Derating Diagram Fig.
PAGE 5
VOL617A Vishay Semiconductors 1.2 1.2 IF = 5 mA NCTR - Normalized CTR (sat) NCTR - Normalized CTR (non-saturated) www.vishay.com 1.0 0.8 0.6 0.4 0.2 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 0 20 40 60 0.8 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 80 100 120 0.1 Fig. 10 - Normalized Current Transfer Ratio (non-saturated) vs. Ambient Temperature 100 0 VCE = 5 V RL = 100 Ω -20 1.0 Phase Angle (deg) NCTR - Normalized CTR (sat) 10 Fig.
PAGE 6
VOL617A www.vishay.com ton, toff - Switching Time (μs) 1000 Vishay Semiconductors VCE = 5 V, IF = 2 mA 100 toff (μs) 10 ton (μs) 1 0.1 0 5 10 15 20 RL - Load Resistance (kΩ) Fig. 16 - Switching Time vs. Load Resistance 1.0 VCEsat - Collector Emitter Saturation Voltage (V) 20 % used 0.8 CTR = 50 % used 0.6 0.4 0.2 10 % used 0 1 100 10 IC - Collector Current (mA) 95 11028 ton/toff - Turn-On/Turn-Off Time (µs) Fig. 17 - Collector Emitter Saturation Voltage vs.
PAGE 7
VOL617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 2.30 max. 4.10 max. 10.20 3.80 + 0.30 - 0.40 0.20 2.00 + 0.10 - 0.05 7.50 ± 0.20 0.10 Seating plane 0.45 ± 0.1 0.70 + 0.30 - 0.40 2.54 nom. 4 3 2.54 Possible footprint 0.90 8.20 1 22533 10.80 technical drawings according to DIN specifications 2 Pin no.
PAGE 8
VOL617A www.vishay.com Vishay Semiconductors SOLDER PROFILE HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.