Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler SSOP-4 80V

VOS617A

www.vishay.com

Vishay Semiconductors

Rev. 1.4, 08-Jan-14

Document Number: 83497

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output,

SSOP-4, Half Pitch, Mini-Flat Package

DESCRIPTION

The VOS617A series has a GaAs infrared emitting diode

emitter, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a 4-pin

50 mil lead pitch mini-flat package.

It features a high current transfer ratio at low input current,

low coupling capacitance, and high isolation voltage.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

FEATURES

• High CTR with low input current

• Low profile package (half pitch)

• High collector emitter voltage, V

CEO

= 80 V

• Isolation test voltage = 3750 V

RMS

• Low coupling capacitance

• High common mode transient immunity

• Material categorization:

For definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

• Telecom

• Industrial controls

• Battery powered equipment

• Office machines

• Programmable controllers

AGENCY APPROVALS

Safety application model number covering all products in

this datasheet is VOS617A. This model number should be

used when consulting safety agency documents.

• UL1577, file no. E52744

•cUL

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

• FIMKO EN 60065, EN 60950-1

• CQC GB4943.1-2011 and GB8898-2011 (suitable for

installation altitude below 2000 m)

Note

• Additional options may be possible, please contact sales office.

22628-1

ORDERING INFORMATION

VOS617A-#X001 T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/

PACKAGE

CTR (%)

5 mA

UL, cUL, FIMKO, CQC 50 to 600 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 200 to 400

SSOP-4,

50 mil pitch

VOS617AT VOS617A-2T VOS617A-3T VOS617A-4T VOS617A-7T VOS617A-8T VOS617A-9T

UL, CUL, FIMKO,

CQC, VDE (option 1)

50 to 600 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 200 to 400

SSOP-4,

50 mil pitch

VOS617A-

X001T

VOS617A-

2X001T

VOS617A-

3X001T

VOS617A-

4X001T

VOS617A-

7X001T

VOS617A-

8X001T

VOS617A-

9X001T

SSOP-4

≥ 5 mm

Summary of content (9 pages)

PAGE 1
VOS617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package FEATURES • High CTR with low input current A 1 4 C C 2 3 E • Low profile package (half pitch) • High collector emitter voltage, VCEO = 80 V • Isolation test voltage = 3750 VRMS • Low coupling capacitance • High common mode transient immunity 22628-1 • Material categorization: For definitions of compliance please see www.vishay.
PAGE 2
VOS617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Pdiss 70 mW IFSM 1.
PAGE 3
VOS617A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 50 mA Reverse current VR = 6 V VR = 0 V, f = 1 MHz MIN. TYP. MAX. UNIT VF 1.18 1.5 V IR 0.01 10 μA CI 7.
PAGE 4
VOS617A www.vishay.
PAGE 5
VOS617A www.vishay.com Vishay Semiconductors 1.2 10 000 NCTR - Normalized CTR (sat) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 - 60 - 40 - 20 0 20 40 60 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 80 100 120 Tamb - Ambient Temperature (°C) Fig. 7 - Leakage Current vs. Ambient Temperature IF = 10 mA 12 10 IF = 5 mA 6 4 IF = 1 mA IF = 2 mA 2 0 0 0.1 0.2 0.3 0.
PAGE 6
VOS617A www.vishay.com Vishay Semiconductors 1000 Tamb = 0 °C VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 1.0 0.8 VCC = 5 V Tamb = - 55 °C FCTR (kHz) NCTR - Normalized CTR (sat) 1.2 0.6 0.4 100 10 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0 0.1 1 10 1 0.1 100 1 IF - Forward Current (mA) Fig. 13 - Normalized CTR (saturated) vs. Forward Current 100 Fig. 15 - FCTR vs.
PAGE 7
VOS617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 1.27 ± 0.25 4.4 ± 0.2 0.2 ± 0.05 5.3 ± 0.3 7.0 + 0.2 - 0.7 0.12 ± 0.1 0.9 1.27 2.0 ± 0.2 2.6 ± 0.3 5.0 7.5 0.4 ± 0.1 22629-2 PACKAGE MARKING (example of VOS617A-3X001T) Pin 1 dimple 617A3X V YWW 25 Notes • Option 1 is reflected with letter “X”. • Tape and reel suffix (T) is not part of the package marking. TAPE AND REEL DIMENSIONS in millimeters 17.1 100 330 (13") Fig.
PAGE 8
VOS617A www.vishay.com Vishay Semiconductors Ø 1.50 ± 0.1 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 5.5 ± 0.1 12 ± 0.3 8 ± 0.1 0.35 ± 0.05 Fig. 18 - Tape Dimensions Document Number: 83497 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.