Datasheet

VS-10CTQ150SPbF, VS-10CTQ150-1PbF
www.vishay.com
Vishay Semiconductors
Revision: 20-May-14
1
Document Number: 94116
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Performance Schottky Rectifier, 2 x 5 A
FEATURES
• 175 °C T
J
operation
• Center tap configuration
• Low forward voltage drop
• High frequency operation
• High purity, high temperature epoxy
encapsulation for enhanced mechanical
strength and moisture resistance
• Guard ring for enhanced ruggedness and long term
reliability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
This center tap Schottky rectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 175 °C
junction temperature. Typical applications are in switching
power supplies, converters, freewheeling diodes, and
reverse battery protection.

PRODUCT SUMMARY
Package D
2
PAK, TO-262
I
F(AV)
2 x 5 A
V
R
150 V
V
F
at I
F
0.93 V
I
RM
7 mA at 125 °C
T
J
max. 175 °C
Diode variation Common cathode
E
AS
5 mJ
V
S-10CTQ150SPbFVS-10CTQ150-1PbF
Base
common
cathode
Anode Anode
Common
cathode
1
3
2
2
Base
common
cathode
Anode Anode
Common
cathode
1
3
2
2
D
2
PAK
TO-262
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
Rectangular waveform 10 A
V
RRM
150 V
I
FSM
t
p
= 5 μs sine 620 A
V
F
5 A
pk
, T
J
= 125 °C (per leg) 0.73 V
T
J
Range -55 to +175 °C
VOLTAGE RATINGS
PARAMETER SYMBOL
VS-10CTQ150SPbF
VS-10CTQ150-1PbF
UNITS
Maximum DC reverse voltage V
R
150 V
Maximum working peak reverse voltage V
RWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average
forward current, see fig. 5
per leg
I
F(AV)
50 % duty cycle at T
C
= 155 °C, rectangular waveform
5
A
per device 10
Maximum peak one cycle non-repetitive 
surge current per leg, see fig. 7
I
FSM
5 μs sine or 3 μs rect. pulse Following any rated load
condition and with rated
V
RRM
applied
620
A
10 ms sine or 6 ms rect. pulse 115
Non-repetitive avalanche energy per leg E
AS
T
J
= 25 °C, I
AS
= 1 A, L = 10 mH 5 mJ
Repetitive avalanche current per leg I
AR
Current decaying linearly to zero in 1 μs
Frequency limited by T
J
maximum V
A
= 1.5 x V
R
typical
1A