User's Manual

ManualsBrandsVision Automobile Electronics Industrial ManualsElectronicsWireless 4 IN 1 Multi-Sensor

Installation & Operation Manual

ZD2301IN-5

ZD2301MY-5

ZD2301EU-5

ZD2301RU-5

ZD2301US-5

ZD2301IL-5

ZD2301KR-5

ZD2301HK-5

ZD2301JP-5

ZD2301BR-5

Wireless 4 IN 1 Multi-Sensor

(Dry Contact, Humidity, Temperature & Light)

ZD 2301

1040508

6B1Z-23001

Summary of content (4 pages)

PAGE 1
Installation & Operation Manual ZD2301IN-5 ZD2301MY-5 ZD2301EU-5 ZD2301RU-5 ZD2301US-5 ZD2301IL-5 ZD2301KR-5 ZD2301HK-5 ZD2301JP-5 ZD2301BR-5 Wireless 4 IN 1 Multi-Sensor (Dry Contact, Humidity, Temperature & Light) ZD 2301 V0 1040508 6B1Z-23001
PAGE 2
Introduction Thanks for choosing the Vision’s wireless 4 in 1 Multi-Sensor (door window contact sensor, humidity sensor, temperature sensor, and light sensor) of the home security device. This sensor is a Z-Wave™ enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave™ enabled network and its security framework.
PAGE 3
Configuration – Humidity Parameter Number Size VALUE Preset 3 1 1~50 (Set up from 1%~50%) 10% Configuration – Light Parameter Number 4 Size VALUE Preset 1 0,5~50 (Set up from 0 for Off or 5%~50%) 10% 8. Awake Mode: Press the Program SW, the LED will flash one time and ZD2301 will send “Wake Up Notification” after 5 seconds. If ZD2301 received “Wake Up No More Information” command then the ZD2301 will go to sleep or it will wait 10 seconds then go to sleep.
PAGE 4
6. Sensor Type 0x05 Scale 0x00 (%) Size and Precision 2 Light Report- If the present illumination is different with the sensor record and exceed the setting program, the sensor will report the present illumination. Multilevel Sensor Report Operation 1. 2. 3. 4. Opening/Closing the door/window to separate the magnet from the sensor will send signal to any association nodes according to the Status/Signal table on page 2 and the LED will flash once.