Installation & Operation Manual ZS 6101 IN ZS 6101 EU ZS 6101 RU ZS 6101 US ZS 6101 JP ZS 6101 BR Wireless Smoke Detector ZS 6101 V1 1020710 6B1Z-61001
COMMAND_CLASS_WAKE_UP_V2 Introduction Thanks for choosing the Vision’s wireless smoke detector of the home security device. This detector is a Z-Wave™ enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave™ enabled network. Every mains powered Z-Wave™ enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate “RF dead-sports”.
8. 9. Battery Power indicator: The detector will report the current status of battery capacity to the user’s contorller. Self-Protection Mode: If the detector removed from bracket, the detector will send an alarm sensor (Alarm type:0x01, level:0xFF) to the Z-Wave Interface Controller , and the Yellow LED will on contiuously and the detector will sound. Federal Communications Commission Statement Install second-floor alarms at the top of first-to-second floor stairwell.
