Commercial Fitness Bike Assembly Guide

5mm T-Shaped Wrench

Screwdriver

TOOLS & PARTS INCLUDED

ORANGE BAG

PINK BAG

HARDWARE INCLUDED

PARTS BOX

Console Mast Cover

Accessory Tray

Color-coded Hardware Bags

Owner’s Guide

Assembly Guide

Warranty Card

BLUE BAG

M8 x 15L Bolt

Quantity: 7

M8 x 20L Bolt

Quantity: 2

M8 x 65L Bolt

Quantity: 2

M8 Lock Washer

Quantity: 4

M8 x 15L Bolt

Quantity: 4

15mm Pedal Wrench

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373

www.visionfitness.com

AG18.45PRD

REV3

starts

vision

with a

it all

Assembly

Guide

E3800HRT

COMMERCIAL FITNESS BIKES

M8 Lock Washer

Quantity: 6

5mm L-Shaped Wrench

PAGE 1
©2007 Vision Fitness. All Rights Reserved. 5.07 AG18.45PRD REV3 COMMERCIAL FITNESS BIKES E3800HRT www.visionfitness.com toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 500 South CP Avenue • P.O. Box 280 • Lake Mills.
PAGE 2
COMMERCIAL FITNESS BIKES E3800HRT ©2007 Vision Fitness. All Rights Reserved. 5.07 AG18.45PRD REV3 www.visionfitness.com toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 500 South CP Avenue • P.O. Box 280 • Lake Mills.
PAGE 3
Assembly Guide STEP 3 • Feed the heart rate wires of the handlebar through the small hole located in the front of the console mast. Pull these wires up through the hole at the top of the console mast. Attach the handlebar to the console mast using four bolts (M8x15L). Tighten with the 5mm T-shaped wrench. Console E3800HRT COMMERCIAL FITNESS BIKE Heart Rate Wires To avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order.