Electric Insert Kit Compatible With: Cadet And 100 Series
PARTS MED L OW HI GH O FF 2 1 3 4 PART NAMES PART NUMBERS 1 Electric Burner Unit VGC-CEB 2 Controller Dial VGC-CCD 3 Lava Rock VGC-LR 4 Heat Resistant Plate VGC-CHRP WARRANTY Subject to the following terms and conditions, Phase 2, LLC, d/b/a Vision Grills (“Vision Grills”), warrants to the original purchaser that the ceramic cooker manufactured or supplied by Vision Grills will be free from defects in material and workmanship under normal use for the following periods from the origina
STARTING ELECTRIC INSERT Insert Electric Burner with lava rocks into the base of the grill until it stops and locks into place. Carefully lift Grill from Stand. Place Plate onto cart felt side up. Replace grill. Step 2: Lava Rocks Step 4: Controller Dial Make sure controller dial is in “OFF” position and plug into Electric Burner unit. Plug power cord into grounded power outlet. STEP 4 Step 5: Set Temperature Use top knob on Controller Dial to adjust to your desired temperature.
IMPORTANT SAFEGUARDS 1 2 3 4 5 6 Read all Instructions. Do not touch hot surfaces. Use handles or knobs. To protect against electrical shock do not immerse cord or plugs in water or other liquid. Close supervision is necessary when any appliance is used near children. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. Do not operate any appliance with a damaged cord or plug, or after appliance malfunctions or has been damaged in any manner.
