Specifications

DXC-D30
DOCKABLE CAMERAS
76
DXF-701 Viewfinder (for the DXC-D30)
The DXF-701 is a 1.5˝ viewfinder which displays numerous operating status
indicators and menu-control capabilities, as well as the highest quality images.
Built with a die-cast aluminum body, the DXF-701 is ruggedly constructed, yet
designed to be extremely user-friendly. Special attention was paid to ergonomics to
ensure that it is easy and comfortable to operate.
SONY
■ One second after power is turned on, the
viewfinder is ready for operation.
■ Displays recording duration in two ways
(selectable from the camera): TTL (Total)
mode — accumulated shooting time from
the start of the tape. This is stored in mem-
ory, even if power is turned off. DUR
(Duration) mode, the recorded time for
the current shot, is individually displayed.
■ Provides an incredible 600 lines of hori-
zontal resolution. This is achieved by
combining a VF Super Detail circuit built
into the DXC-30, with phase-corrected
peaking circuitry located in the viewfinder
itself. The VF Super Detail circuit adds a
vertical detail signal to the viewfinder’s
Video signal, making it easier to achieve
precise focus. The phase-corrected peak-
ing circuit meanwhile increases horizontal
detail in the viewfinder signal, balancing
level and phase. There is also fine adjust-
ment control of the peaking level.
■ Displays a Safety Zone and Center Marker
to accurately frame objects as they are seen
on monitors. The Safety Zone can indi-
cate either 80% or 90% of the viewfinder
frame. You have a choice of Safety Zone
only, Safety Zone with Center Marker, or
both off.
■ Always confirms when Auto White
Balance is completed, along with the
color temperature.
■ Displays whether or not a connected
microphone is working. A musical icon
appears when an appropriate level of
sound is received via the mic input.
■ Automatically indicates when battery voltage
goes under 11 volts.
In addition to the conventional menu screen, the DXC-D30 has an advanced menu
screen which gives you enhanced control of the camera functions. You can change the
initial settings according to your particular need.
■ Viewfinder’s position can be adjusted hor-
izontally to accommodate personal prefer-
ences. The large diameter eye-cup eases
eye strain and simplifies focusing.
■ A wide range of diopter adjustments (-3 to 0)
is provided to compensate for differences
in eyesight.
■ External Record tally lamp is positioned
where it can be easily checked during
shooting.
■ Internal indication lamps for Battery,
Record/Tally, Shutter and Gain-Up are
situated close to the viewfinder for easy
viewing.
( )Shows
Item Selection
Initial Setting
Marker To change the type of center
Marker/Safety Zone CENT/80%)
Zebra 70% or 100% (70%)
DCC+ DCC Plus on/off (ON)
Tone 1k Hz Audio Reference Signal On/Off (ON)
EVS EVS On/Off (OFF)
EZ Mode Standard or Custom (STD)
Bars (Width) SMPTE or SNG (narrow bars*) (SMPTE)
L.L. Indicator Low Light Indicator (ON)
Iris Indicator F-Number Indicator On/Off (ON)
Gain Indicator Display of current Gain Selection (ON)
Filter Indicator Filter Indicator On/Off (ON)
Mic Camera Mic Check On/Off (ON)
Audio Indicator Audio Level Indicator of PVV-3 (ON)
Tape Display of Remaining Tape of PVV-3 (ON)
Time Code Display of Time Code Data of PVV-3 (ON)
ID Indicator Display of Camera ID# with Color Bars (ON)
ID Set Setting of Camera ID
*Narrow Color Bar setting is used in some cases for transmission via communications satellite.
7-Day Customer Satisfaction Guarantee