Specifications

CCU-M5
CAMERA ACCESSORIES
82
SONY
Most Orders Shipped Within 24 Hours
Camera Control Unit
The CCU-M5 is a flexible camera control unit
designed for use in both 26-pin and 14-pin
multicore cable systems — individual 26-pin
and 14-pin CCU interfaces are fitted for direct
connection of any DXC Series camera designed
for video production use. The Sony DXC-950
multi-purpose CCD camera may also be connected. Remote
control distances extend up to 1000 feet, and for further convenience, the optional RM-M7G Remote Control Unit can
also be used. The CCU-M5 has control functions necessary for effective CCD camera control, as well as a carefully
thought-out layout of switches and buttons for quick and efficient use. Provides RGB, component, composite and S-
Video output for use in a wide range of applications. Can be rack mounted.
■ Equipped with 26-and 14-pin connec-
tors for connection to DXC-series cam-
eras equipped with a 26-pin (using the
CA-537 adapter) or 14-pin connector
(using the CA-327 adapter), via CCZ-A
(up to 1000´) or CCQ-AM cables (up
to 330´).
■ Selectable composite, S-Video, RGB
and component signal output.
■ Provides sophisticated control of the
DXC-327/537/637/D30 and DXC-950
for effective CCU operation.
■ Switchable camera or color bar mode
■ Front panel DETAIL control knob.
■ Remote control of the camera’s shutter
with front panel shutter controls.
Shutter speed selection is with a six-step
control knob (including Clear Scan),
and the speed selected is shown on a
four digit LED display. An on/off
switch is provided to disable shutter
activation.
■ In addition to a 4-pin connector for
Tally/Intercom, there are screw termi-
nals provided as a convenient alternative
when the 4-pin connector cannot be
used.
■ Built-in AC power eliminates the need
in most cases for an external AC
adapter. Power to the connected camera
head is supplied from this power unit.
■ 19˝ rack mountable and 2RU high.
RM-M7G Compact Remote Control Unit
The RM-M7G is a lightweight hand-held control unit which can be used
with the CCU-M5 for more flexible operation. When connected via the
10-pin connector, basic functions of the camera interfaced to the CCU
can be controlled. This gives you a choice of control from the the CCU or
RM-M7G. Can also be directly connected to a DXC Series camera.
CCA-7 10-pin to 10-pin Cables
(RM-M7G to the CCU-M5):
CCA-7-5 5 meter cable ....................................................189.95
CCA-7-25 25 meter cable ................................................314.95
CCA-7-50 50 meter cable ................................................579.95
CCA-7-100 100 meter cable ..........................................924.95
CCZZ-1E: 26-pin/26-pin extension connector for CCZ-A cable interconnection........94.95
CCZZ-1B: Wall mount (bulk-head) type connector for CCZ-A cable connection ....114.95
CCZ-A Cables
26-pin to 26-pin camera cables that allow serial transmission between the CCU-M5 and the
DXC-327/537/637/D30 when used with the CA-537 Camera Adapter.
CCZ-A2: 2m (6.4´) ......................249.95
CCZ-A5: 5m (16.4´) ....................374.95
CCZ-A10: 10m (33´) ....................494.95
CCZ-A25: 25m (82.5´) ................699.95
CCZ-A50: 50m (165´) ................1049.95
CCZ-A100: 100m (330´) ............1579.95
CCQ-10AM: 10m (33´) ................224.95
CCQ-25AM: 25m (82.5´) ............389.95
CCQ-50AM: 50m (165´)................649.95
CCQ-100AM/US: 100m (330´) ..1419.95
CCQ-AM Cables
14-pin to 14-pin cables for connection to DXC cameras using the CA-327 Camera Adapter.
FEATURES