Installation guide

Vision Engravers and Routers PRE-Installation Guide4

1 Introduction and Computer Requirements

This guide contains information to prepare the new owner of a Vision Engraver or

Router for the proper installation of their machine. It is the customer's responsibility to

read through this guide and make sure the work area, electrical and computer

requirements are met prior to the arrival of a representative from Vision for the

scheduled installation/machine orientation date (Training NOT included with Vision

Express machines). If for any reason, there are questions about these requirements,

please call your Vision representative ASAP to either clarify these requirements, or

reschedule the installation date. If Vision personnel arrive and all pre-installation

requirements are not complete, there will be an additional charge of $750/day

while waiting.

IT IS HIGHLY RECOMMENDED THAT THE COMPUTER USED TO OPERATE

THE VISION ENGRAVER OR ROUTER BE CONNECTED TO THE INTERNET.

THIS ALLOWS THE USER TO ALLOW VISION'S TECHNICAL SUPPORT TO

ACCESS THE MACHINE AND TROUBLESHOOT IF NECESSARY.

Minimum System

Requirements

CPU:

Dual Core (2.0GHz or higher)

Hard Drive:

120 GB

RAM:

1GB + OS Requirements

Operating System:

Windows 8 32/64 Bit

Windows 7 32/64 Bit

Windows Vista 32/64 Bit

Windows XP 32 Bit

Ports:

USB port for security dongle

Local or network Ethernet port to connect machine

Suggested System