Specifications

Chapter 4 - Optional Accessories 33
Vacuum Chip Removal System
The optional vacuum chip removal system is designed to simplify the engraving process and minimize wear and tear on
the engraver. The vacuum chip removal system uses a vacuum nose cone to remove chips created during the engraving
process before they have the chance to create problems. The quiet pump, coupled with the micro fine-layered filters
assures that your unwanted chips are whisked away effortlessly. The vacuum pump canister uses replaceable filters that
can also be reused, to assure maximum efficiency and cost-effectiveness.
The vacuum chip removal system allows prompt removal of chips and dust created in the engraving process, reducing
contamination and overheating in the spindle area. Chip removal also prevents the cutter from skipping over letters due to
stray particles. This vacuum chip removal system is available with or without a Vision vacuum nose cone.
(Figure 4.6) The Optional Vacuum Chip Removal System
 
 
  
  
  