Specifications

5
SP-1200P_manual_en
INSTALLATION
1. FIT BRACKETS TO WALL Position brackets over load-bearing studs and use appropriate
screws to fix brackets. Ensure they are plumb.
NOTE: Do not position the top of bracket closer than 90mm to ceiling.
2. TERMINATE CABLES TO MOUNTS
Slave loudspeaker bracket:
Master loudspeaker bracket:
Incorrect termination of power is dangerous and will damage the product.
The black cable is negative (-). The white cable is positive (+).
Input from master loudspeaker
Use unshielded speaker cable provided. If cable
provided is not long enough use unshielded
speaker cable with gauge of 0.75mm or higher.
Blue= Input 1 (phono or minijack cable)
Green= Input 2 (phono or minijack cable)
Black= Loudspeaker output to slave speaker
(unshielded cable)
Red= Power Input