User`s manual

Acquisition Control AW00049313000
126 Basler runner
8.5.3 Acquisition Trigger Wait Signal
The camera’s Acquisition Trigger Wait output signal will be low when the camera is in the process
of acquiring a frame and is not able to accept a new acquisition start trigger. As soon as the camera
is ready to accept a new acquisition start trigger, the Acquisition Trigger Wait signal will go high.
This signal can be selected as the source signal for one of the output lines on the camera.
For more information about selecting the source signal for an output line on the camera, see
Section 7.7.2.4 on page 65.
For more information about the electrical characteristics of the camera’s output lines, see
Section 7.7.2 on page 61.
8.5.4 Frame Trigger Wait Signal
The camera’s Frame Trigger Wait output signal will be low when the camera is in the process of
acquiring a frame and is not able to accept a new frame start trigger. As soon as the current frame
acquisition is complete and the camera is ready to acquire a new frame, the signal will go high.
By default, the Frame Trigger Wait signal is selected as the source signal for output line 2 on the
camera. However, the selection of the source signal for a physical output line can be changed.
For more information about selecting the source signal for an output line on the camera, see
Section 7.7.2.4 on page 65.
For more information about the electrical characteristics of the camera’s output lines, see
Section 7.7.2 on page 61.
8.5.5 Line Trigger Wait Signal
The camera’s Line Trigger Wait output signal will be low when the camera is in the process of
acquiring a line and is not able to accept a new line start trigger. As soon as the current line
acquisition is complete and the camera is ready to acquire a new line, the Line Trigger Wait signal
will go high.
This signal can be selected as the source signal for one of the output lines on the camera.
For more information about selecting the source signal for an output line on the camera, see
Section 7.7.2.4 on page 65.
For more information about the electrical characteristics of the camera’s output lines, see
Section 7.7.2 on page 61.