User`s manual

AW00049313000 Specifications, Requirements, and Precautions
Basler runner 13
1.7 Precautions
Avoid Dust on the Sensor
The camera is shipped with a cap on the lens mount. To avoid collecting dust
on the camera’s sensor, make sure that you always put the cap in place when
there is no lens mounted on the camera.
CAUTION
Applying Incorrect Power Can Damage the Camera
The camera’s nominal operating voltage is +12 VDC (± 10%). If the voltage
applied to the camera is greater than +13.2 VDC, severe damage to the
camera can result. If the voltage is less than +10.8 VDC, the camera may
operate erratically.
Make sure that the polarity of the power applied to the camera is correct.
Applying power with the wrong polarity can result in severe damage to the
camera.
CAUTION
Incorrect Plugs Can Damage the Camera’s Connectors
The plug on the cable that you attach to the camera’s 12-pin connector must
have 12 female pins. Using a plug designed for a smaller or a larger number
of pins can damage the connector.
The plug on the cable that you attach to the camera’s 6-pin connector must
have 6 female pins. Using a plug designed for a smaller or a larger number of
pins can damage the connector.
CAUTION
Inappropriate Code May Cause Unexpected Camera Behavior
The code snippets provided in this manual are included as sample code only.
Inappropriate code may cause your camera to function differently than
expected and may compromise your application. To ensure that the snippets
will work properly in your application, you must adjust them to meet your
specific needs and must test them thoroughly prior to use.
The code snippets in this manual are written in C++. Other programming
languages can also be used to write code for use with Basler pylon.
When writing code, you should use a programming language that is both
compatible with pylon and appropriate for your application.
For more information about the programming languages that can be used with
Basler pylon, see the documentation included with the pylon package.
CAUTION