User`s manual

AW00049313000 Revision History
Basler runner 231
Revision History
Doc. ID Number Date Changes
AW00049301000 16 Nov 2007 Initial release. Applies to color prototype cameras only.
AW00049302000 26 Feb 2008 Primarily version. Applies to both mono and color cameras.
AW00049303000 26 Mar 2008 Applies to series production cameras.
AW00049304000 17 Apr 2008 Corrected the default for the Exposure Time Base Abs parameter stated in
Section 8.2.5.2 on page 94. Added a note to this section regarding the
minimum allowed exposure time and regarding a bug in the GenICam
interface.
Added Section 11.3 on page 180 that describes the digital shift feature.
AW00049305000 16 May 2008 Added text to the tables in Section 1.2 to indicate that a C-mount lens
adapter is available on 1k and 2k mono cameras.
Updated the tolerances in Figure 3 on page 7 and Figure 4 on page 8.
Added a C-mount adapter drawing to Section 1.4.3 on page 10.
Corrected the name of the Gamma parameter in Section 11.6 on page 193
(in earlier versions, the Gamma parameter was incorrectly referred to as
the Gamma Raw parameter).
AW00049306000 5 Dec 2008 Corrected the contact information in the front pages.
Added "Tolerances are typical" notation to Figure 5 on page 9.
Updated the content of Section on page 113.
Added Section 13.2 on page 227 describing how to obtain an RMA number.
Updated all instances of the Basler web address.
AW00049307000 26 Feb 2009 Added Section 11.7 on page 194 describing the shading correction feature.
AW00049308000 3 Dec 2009 Updated phone numbers and U.S. contact address.
Indicated the availability of programming languages other than C++ for use
with pylon in Section 1.7 on page 13.
Modified the explanations of digital shift in section 11.3: If, after shifting, any
bit higher than the MSB of the shifted output is one, then all "added" LSBs
of the output will be set to one.
Modified Section 11.7 on page 194 (gain shading) to make it applicable to
both mono and color cameras.
AW00049309000 21 Apr 2010 Preliminary version:
Added the following sections and content:
 Acquisition Start Triggering (Section 8.2.2 on page 78)
 Partial Closing Frame parameter in Section 8.2.3.2 on page 83
 Frequency Converter (Section 8.4 on page 122)
 Input Related Signals as Output Signals (Section 7.7.2.2 on page 63)
 Trigger Delay (Section 11.8 on page 198)