User`s manual

Physical Interface AW00049313000
44 Basler runner
7.2 Connector Pin Assignments
and Numbering
7.2.1 Pin Assignments for the 12-Pin Receptacle
The 12 pin receptacle is used to access the three physical input lines and two physical output lines
on the camera. The pin assignments for the receptacle are shown in Table 4.
Pin Designation
1 I/O Input 1 -
2 I/O Input 1+
3 I/O Input 3 -
4 I/O Input 3 +
5Gnd
6 I/O Output 1-
7 I/O Output 1 +
8 I/O Input 2 -
9 I/O Input 2 +
10 Not connected
11 I/O Output 2 -
12 I/O Output 2+
Table 4: Pin Assignments for the 12-pin Receptacle
Note
For the I/O lines to work correctly, pin 5 must be connected to ground.