User`s manual

AW00049313000 Physical Interface
Basler runner 45
7.2.2 Pin Assignments for the 6-Pin Receptacle
The 6 pin receptacle is used to supply power to the camera. The pin assignments for the receptacle
are shown in Table 5.
7.2.3 Pin Assignments for the RJ-45 Jack
The 8-pin RJ-45 jack provides Ethernet access to the camera. Pin assignments adhere to the
Ethernet standard.
Pin Designation
1 +12 VDC Camera Power (+12 VDC ± 10%) *
2 +12 VDC Camera Power (+12 VDC ± 10%) *
3 Not Connected
4 Not Connected
5 DC Ground **
6 DC Ground **
Table 5: Pin Assignments for the 6-pin Receptacle
Note
* Pins 1 and 2 are tied together inside of the camera.
** Pins 5 and 6 are tied together inside of the camera.
To avoid a voltage drop when there are long wires between your power supply
and the camera, we recommend that you provide +12 VDC through two
separate wires between the power supply and pins 1 and 2 in the receptacle.
We also recommend that you provide the ground through two separate wires
between the power supply and pins 5 and 6.