INTERNET EXPLORER WEB MONITORING User Manual 1st Edition : 17 July 2012 Thank You! Before operating the system, please read this User Manual and retain it for future reference. ※ The picture & functions & supplied items might differ according to the specification and model. ※ Contents of this user manual are protected under copyrights and computer program laws.
Contents 1. WEB MONITORING THROUGH INTERNET EXPLORER ............................................................. 3 1.1 Web Login ........................................................................................................................ 3 1.2 Installation Active-X .......................................................................................................... 3 1.3 Web Monitoring ..............................................................................................
1. Web Monitoring through Internet Explorer The DVR system has built-in web server by itself. Thus, user can be connected to the system by ordinary web-browser via network for live monitoring, playback or remote configuration without installing Remote Manager software. The web monitoring service works only on Internet Explorer. 1.1 Web Login User is required to put the right IP address in the web browser after getting the web port available by router.
3. If problem on the installation, please change a security option as the follow 1) Go to “Internet option > Security Setting 2) Click “Custom level” and then find “Download signed ActiveX Controls” and “Download Unsigned ActiveX Controls” 3) Select “Prompt” option for both of option. 4. If finishes correctly, the monitoring mode will be shown on the screen. Note Web monitoring screen might be different depending on the DVR model.
1.3 Web Monitoring [Web Monitoring] User can get into web monitoring by clicking “WEB MONITORING” button in the right-top corner of the window. In order to connect to DVR, user has to select the number of channel or select “ALL CHANNEL ” as below, and then click “CONNECT” button User can monitor live video in 1, 4, 9 or 16 screen mode. If user wants to see single channel in full screen, then user can make double-clicks of the left mouse button positioned on the live video screen.
[WEB Monitoring Screen Control] 1. 1Ch Screen Mode: Click “ ” button or double click on the screen. If click the button again, the channel will sequence to next channel. 2. 4Ch Screen Mode: Click “ ” button. If click the button again, the channel will sequence to next 4ch group. 3. 9Ch Screen Mode: Click “ ” button. If click the button again, the channel will sequence to next 9ch group. 4. 16Ch Screen Mode: Click “ ” button.
[Archive] Web Monitoring supports a simple video recording function for live monitoring. 1. 2. 3. 4. Click the right mouse button on the channel which wants to record. Select “Archive” option, and then [Recording…] OSD will show to screen with red color To complete the recording, select “Archive” option again. The complete message will show and click “OK” button to open the folder where recorded data saves. Note Archive function supports only 1channel recording and SSF file format type.
[PTZ Control] If PTZ Camera connects to the DVR, it can be controlled through Web Monitoring. The selected channel will mark with yellow border line and can control with “PAN & TILT” button at the right side. PAN & TILT Click 8-way button to move PTZ Camera. ZOOM Click the button to ZOOM in or out. FOCUS Click the button to control focus. PRESET If PTZ camera setup the preset, select the number and click “MOVE” button, it will move to a corresponding location.
1.4 Playback [Playback] User can remotely playback the DVR images by clicking “PLAYBACK” button in the right-top corner of the window. In order to connect to DVR, user has to select the number of channel or select “ALL CHANNEL ” and then click “CONNECT” button Playback mode supports 1,4,8,16 channel mode as in the live mode. Playback resolution follows to DVR’s, thus CIF resolution (352x240/352x288) video data displays with original size on 1 channel mode.
[Playback Mode Screen control] User can change playback screen mode 1. 1Ch Screen Mode: Click “ ” button or double click on the screen. If click the button again, the channel will sequence to next channel. 2. 4Ch Screen Mode: Click “ ” button. If click the button again, the channel will sequence to next 4ch group. 3. 9Ch Screen Mode: Click “ ” button. If click the button again, the channel will sequence to next 9ch group. 4. 16Ch Screen Mode: Click “ ” button.
Note Archive function supports only 1channel recording and SSF file format type. The recorded data requires Multi-Backup Player or CMS to playback. Note OS higher than Windows VISTA requires the writing permission to save data to local folder. If no permission, even it seems to complete, there is no recorded. Note De-Interlace and Audio out function works on the real-time monitoring mode and playback mode as well.
[Playback time setting] Select the date and time and click [Go] button to playback. The date in bold means it has recorded data [Playback Icon] Play/Pause is toggled and playback speed is shown on the right box [PLAY DST] Check this box to play overlapped images during DST (Daylight Saving Time) period. Overlapped period displays with blue color on the intelli-Search bar. [Intelli-Search bar] User can move the red-vertical line to the time that user wants to search.
1.5 WEB Configuration [WEB Configuration Menu] Note Menu might be different depending on the model. Main Classification Sub Classification SYSTEM INFO SYSTEM USER FACTORY DEFAULT SYSTEM REBOOT CAMERA AUDIO DEVICE SENSOR MOTION ALARM EXTRA ALARM RECORD CAMERA SCHEDULE NETWORK NETWORK DDNS NOTIFICATION QUICK SETUP QUICK SETUP After log in with the right ID and password, user can make various configuration in Web Configuration window as below.
1.5.1. System – System Information Setup the information of system. It supports the limited functions through Web. 1. Site Name: A. Insert “Site Name” to distinguish DVR. B. It uses to create backup folder name. C. It is recommended to input English for name. 2. Site ID: it is to recognize DVR ID for using Keyboard or remote controller 3. Date / Time A. Displays the current date and time at the DVR. B. The date and time can be changed to prevent data loss at the DVR side only. 4. Date / Time Format A.
F. Sync Port It is for communication port between server and client. The default is “8002” G. Sync Server i. It is available at the client mode. ii. Input IP address from Time sync server. H. NTP Server i. Input IP address or domain of time sync server. ii. The default is “pool.ntp.org” iii. The public NTP server requires DNS setting for internet connection. i. ii. 5. Remote ID: Displays IR remote controller ID on the DVR. 6. Version: Displays firmware and hardware version on the DVR. 7.
12. Display / SPOT-OUT A. Sequence Dwell Time: Setup the dwell time to sequence the DVR channel. B. Spot-Out Dwell Time : Setup the dwell time to sequence the Spot-Out. C. Alpha Blending: Displays the alpha blending on the DVR. D. VGA Mode: Displays the VGA resolution on the DVR. E. Spot-Out : Select channel to display on Spot-Out monitor. F. OSD : Select display option for OSD. 13. HDD FULL: It is a function for HDD full. A.
1.5.2. System – User Setup user account for DVR operation. If you need a limitation for operation, you can create a user account with limited permissions. (“admin”, which is a default administrator, has all permission.) 1. User ADD A. Click “New User” button and input the user ID and password. B. After setup the permission and click “Add” button to add a new user. C. The added user can access to remote software with the same permission. D. After user addition, click “Save” button to complete. E.
1.5.3. System – DEFAULT It is to initialize DVR setting. If having factory default, the access to Web monitoring is not available because DVR IP address is changed. 1.5.4. System - REBOOT It is for remote reboot. After reboot, please re-start Internet Explorer.
1.5.5. Device – Camera It is for setup camera color values and motion area. 1. CAMERA SELECTION: Select camera number to setup. 2. Setup Motion Area A. Select an area for motion detection. The motion detection area is marked with red color. B. Setup motion detection area : i. Click or Click and drag the area for setup the motion detection are on the blank. ii. For delete the motion detection area, click or click and drag on the motion detection area. 3. Title: Input the individual name of DVR.
Note 1. Click “SET” button to save the changes for video setting. 2. Click “DEFAULT” button to initialize the video setting. Note Menu might be different depending on the DVR model. 1.5.6. Device - Audio It is for setup the audio function on/off and live audio output channel on the DVR.. Note To add audio into video record data, the audio recording channel should be assigned as the follows.
1.5.7. Device – Sensor It is setup for sensor in and out . 1. NO. Sensor number on the DVR. 2. ON/OFF Sensor On/Off. 3. CAMERA the assigned camera setup with each sensor. 4. RELAY the linked Relay setup with each sensor. 5. INTENSIVE Intensive recording setup when sensor triggers. (Max. 30/25fps) 6. Preset PTZ preset setup. If sensor triggers, the connected PTZ camera moves to preset location. 7. DWELL Relay working period setup. 8.
1.5.8. Device – Motion Alarm It is the setup for motion alarm. 1. CAMERA Channel on the DVR. 2. ON / OFF Motion Alarm on or off setup. 3. OUT the linked relay setup. 4. INTENSIVE Intensive recording setup when motion detects. (Max. 30/25fps). 5. DWELL Motion alarm working period setup. 6. PRE-ALARM Recording and camera popup period setup in seconds just before motion detection. It links with sensor setting. 7. NOTICE Alarm notice type setup on the DVR.
1.5.9. Device – Extra Alarm There are several alarm functions available on the system such as SMART, VIDEO LOSS, RECORDING FAILURE and HDD FULL 1. 2. 3. 4. S.M.A.R.T: HDD error alarm VIDEO LOSS: Video Loss alarm RECORDING FAILURE: Recording failure alarm by HDD failure or system error. HDD FULL : Disk Full Alarm A. Disk Usage: Assign the HDD full usage. Note Extra alarm should be setup “ON” for event recording. Note S.M.A.R.
1.5.10. Recording – Camera [RECORD] It is for recording setup on the DVR. 1. CAMERA The channel on the DVR. 2. ON / OFF Select on or off to record. If setup “OFF”, Video will work for live and network transmission, it is not recording. 3. RESOLUTION Select the recording resolution. The available resolutions are the follows. A. CIF: 352*240(NTSC), 352*288(PAL) B. Half D1: 720*240(NTSC), 720*288(PAL) C. D1: 720*480(NTSC), 720*576(PAL 4. FPS A. Select the recording speed for each channel. B.
[Dual Stream] It is a setup for network video transmission. 1. CAMERA The channel on the DVR. 2. RESOLUTION Select the resolution for network transmission in real-time. The selectable resolutions are the follows. A. CIF: 352*240(NTSC), 352*288(PAL) B. Half D1: 720*240(NTSC), 720*288(PAL) C. D1: 720*480(NTSC), 720*576(PAL D. Dual Stream resolution must be less than the recording resolution. 3. FPS A. Select the transmission speed for each channel. B.
1.5.11. Recording – Schedule Set recording schedule for each camera. First, select the camera to set schedule, or “All”. Recording can be set by each hour from 00 through 23 a day. NO COLOR (Off) “Off” means no recording. Even though user set recording frames and on in “CAMERA”, the system will not record anything if user sets “OFF” in SCHEDULE. YELLOW COLOR (Continuous Recording) In continuous recording mode, the system records all the time as set by “CAMERA”.
1.5.12. Network – Network It shows the current network setting on the DVR, 1.5.13. Network – DDNS It shows the current DDNS setting on the DVR. .
1.5.14. Network – Notification 1. REMOTE NOTIFY The system can notify an event to the IP address of Remote Software PC over the network. Select REMOTE NOTIFY to use this function and set IP address & events. A. ADDRESS i. Input the IP address of Remote Software PC which will receive events notification. B. PORT i. Input Port number which is set at the Remote Software PC. Default is 8003. C. EVENTS i. Select events to be notified. When “ALL” is selected, all of the events will be notified. D.
2. EMAIL NOTIFY ADD / EDIT The system can make an event notification to the e-mail address registered in the DVR. Select E-MAIL NOTIFY to use this function and set e-mail address & events. A. EMAIL ADDRESS i. Click [NEW EMAIL] button to add new email account for registration. ii. Input the email address to receive the event. B. EVENT i. Select events to be notified. When “ALL” is selected, all of the events will be notified. ii. If it is sensor or motion alarm, the email includes still image shot. C.
1.5.15. Quick Setup – QUICK SETUP Quick Setup is to help user make easy configuration for recording resolution, recording speed, recording mode, recording quality and recording periods based on the capacity of HDD installed. The setting made by QUICK SETUP will get the first priority to apply on the system whatever user sets configurations in other menu. USE QUICK SETUP A. RECORD i. Check [USE QUICKSETUP] option to use quick recording setup. ii.
1.6 Q&A Q: Web Connection is fine, but no video display . 1) It is a difference between WEB Configuration port and video transmit port. Video transmission port uses TCP/IP port(Default port) to display, and WEB Configuration port is Web port. 2) Please check the router port forwarding setting. If not open, it can be caused problems for video. 3) If there are many connections to DVR, it may have the problem. Please disconnect and reconnect to DVR. Q: Video quality is not good.
