Users Manual
Congratulations on your purchase of the USB Bridge from Enhanced Vision. The USB Bridge is a very useful accessory to be used in conjunction with your Enhanced Vision product(s). When used along with the Acrobat™, Flipper™ or Max™, the USB Bridge provides an all-in-one solution, bringing both computer connectivity and portability for these devices. The USB Bridge serves as a central hub for connecting your Enhanced Vision product to your laptop or desktop PC using a standard, USB cable.
Chapter 1: Before you Begin 5 Chapter 2: System Requirements 6 Chapter 3: Safety Precautions Chapter 4: Package Contents & Controls 7-8 9-10 Chapter 5: Installation 11-14 Chapter 6: Using the USB Bridge 15-20 Chapter 7: Charging & Using the Battery 21-22 Chapter 8: Tips for using the USB Bridge 23-24 Chapter 9: Troubleshooting 25 Chapter 10: Specifications 26-27 Chapter 11: Warranty Information 28-29 Chapter 12: Other EV Products 30-32 Chapter 13: Contact Information 32 Before you be
System requirements In order to take full advantage of the features of the USB Bridge, it must be connected to a compatible Enhanced Vision product and a personal computer (desktop or laptop/notebook).
Transportation: • This product is intended to be used as a portable device. Please use care when connecting/disconnecting cables and accessories. • Use caution if you are repositioning the USB Bridge a short distance across a desk or table. Make sure you do not pull on any power cords or connector cables which could cause damage to the cables or input connections. Care & Maintenance: • Always turn the power OFF on the USB Bridge when the system is not in use.
Software installation 1 IMPORTANT! It is highly recommended that you install the included software before making the hardware connections to your PC. 7 9 8 6 2 3 Do not connect the included USB cable or the hardware interface to your PC until after the software installation has completed. Failure to follow these instructions may cause your PC to “freeze” or cause the USB Bridge and software to incorrectly function.
. Connect the tip of the included power supply to the “DC 12V” input port on the rear of the USB Bridge. (See Figure 7) 2. Upon Insertion of the CD you will have a window automatically open, double click the icon and the Setup wizard will appear on screen, click “Next”. (See Figure 2). 3. You can now connect your device to the USB Bridge.
11.The software will start installing. This should take aprox. 1 min. (See Figure 11). At completion of the installation the Viewer application will automatically open and you will have a black, full screen window. 12.Press the POWER button on the front of the USB Bridge. When the power is turned on, the green “POWER” indicator will illuminate and your image should appear on screen. (See Figure 12) 13.To Start the viewer application in the future, See next page for instructions.
4. Press the [F8] function key on your PC keyboard to toggle the position of the on-screen camera window. Each press of the [F8] key will rotate the camera window position clockwise (left, top, right or bottom, or full screen). After cycling through all five camera window positions, pressing the [F8] key a sixth time will exit the camera viewing window, returning you to your full screen PC desktop. Pressing [F8] again will repeat all six screen rotation cycles in sequence (See Figure 4).
Capturing a Still Image: Viewing a Stored Image: The Viewer application allows you to capture a still photo (or “snapshot”) of the camera image. This is especially useful in school or work settings, where it may be desirable to magnify and store text that is located on an distant object (i.e. chalkboard or dry erase board) and later recall the image (homework assignments, etc.). Use the following procedure to use the Image Capture feature: 1) Press the [F6] function key on your PC keyboard.
Using the Hot Keys: From factory default, the following functions are assigned (using “Hot Keys”) to remotely control the viewer application options of the USB Bridge. Hot Key: Special Notes regarding Power Options: • The AC adaptor included with the USB Bridge can supply power to your compatible Enhanced Vision product. This is the preferred method of powering the unit when using the system near an AC (mains) wall outlet or when using the system at home.
Tips for using the usb bridge Charging the battery: 1) Insert the lithium battery into the charger base of the USB Bridge so that it can fully charge. Do not use extreme force when inserting the battery, as it will only fit securely in one direction (See Figure 1). 2) Connect the tip of the included power supply to the “DC 12V” input port on the rear of the USB Bridge (See Figure 2). 3) Plug in the remaining end of the power supply to an available AC/mains outlet. (See Figure 3).
Using Flipper NTSC/PAL with the USB Bridge • The Flipper is compatible with the USB Bridge • Using a new, fully charged lithium battery, the USB Bridge will supply portable power to your Flipper for approximately 3 hours* • When using the Flipper (reading mode), activate the reading lamp switch to provide improved image quality Using Max with the USB Bridge • The Max is compatible with the USB Bridge.
Specifications Dimensions & Weight: • Dimensions: ~ 4.75”W x 4”D x 1.25”H • Weight: ~ 8 oz. (with battery) Minimum Hardware Requirements: Minimum requirements OS: Windows XP • • • • • Processor: Intel Pentium M 1.5 GHz (or higher) Memory: 512 MB (or higher) USB 2.
Warranty information Enhanced Vision USB Bridge Warranty Policy Enhanced Vision products are designed to give you the highest quality image, convenient features, ease of use and reliable service. The USB Bridge has been inspected and tested prior to shipping. Enhanced Vision warrants the USB Bridge against defects in material and workmanship under normal use for two years from the date of original purchase.
other enhanced vision products Pebble – Compact, Ultra-Portable Magnification! The Pebble is a handheld electronic video magnifier that you can take anywhere. Weighing less than 8 ounces, Pebble features a uniquely-designed folding handle and includes both near-viewing and table reading modes. Small enough to fit in your pocket or purse, the Pebble is the ideal companion to provide magnification, on the go. Featuring a built-in 3 .5” or 4.
Contact Information Notes Amigo – Your Portable Friend! Amigo is a truly portable desktop magnifier and is the lightest weight it its class. Optimal viewing is achieved with a tilting 6.5 inch viewing screen. Amigo is battery operated and can be taken anywhere. Magnification: 3.
______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ________________________________
The USB Bridge is an accessory designed to operate in conjunction with Enhanced Vision products. The products manufactured by Enhanced Vision enlarge and enhance images to improve the lives of people who have low vision. The extent to which Enhanced Vision products can improve the ability to see images and text depends on a person’s individual condition and level of visual impairment. Enhanced Vision products are not designed to restore vision, correct eye conditions or halt degenerative vision loss.
