Specifications

2524
Chapter 8 tipS For uSing the uSB Bridge
Chapter 9 trouBleShooting
Using Flipper NTSC/PAL with the USB Bridge
• The Flipper is compatible with the USB Bridge
• Using a new, fully
charged lithium battery,
the USB Bridge will
supply portable power
to your Flipper for
approximately 3 hours*
• When using the Flipper
(reading mode), activate
the reading lamp switch to provide improved
image quality
Using Max with the USB Bridge
• The Max is compatible
with the USB Bridge.
• Using a new, fully
charged lithium battery,
the USB Bridge
will supply portable
power to your Max for
approximately 4 hours*
• Only color versions of the Max camera will
display color images when shown on the PC
display
*Estimatedtimesonly.Actualusagetimeswillvary
based on the life cycle remaining on the battery.
• No camera image appears on screen
•Does you computer meet the minimum system
requirements?(page6)
•Is the software for the USB Bridge installed
correctly?(pages11-12)
•IsyourEnhancedVisionproductcorrectly
attachedtotheUSBBridge?(pages13-14)
•IstheincludedUSB2.0cableattachedtothe
USBBridgeandyourPC?(pages13-14)
•Checkforpower-isthePowerLEDontheUSB
Bridgeilluminated?(page15)
• Video image is jagged and/or slow moving
•Does you computer meet the minimum system
requirements?(page6)
•Besureyouareconnectedtoahigh-speedUSB
2.0portonyourPC.(page6)
• Camera images appear as Black & White only
•IsyourEnhancedVisionproduct(Max)designed
todisplaycolormodes?(page24)
•UsetheModebuttononyourEnhancedVision
product to cycle through Color, Black & White or
Enhancedmodes.Refertothemanualincluded
withyourEnhancedVisionproductfordetails.
• The battery will not power the camera
•CanyouuseACpowertopowerthecamera?
(pages13-14)
•Doesthebatteryneedtobecharged?(page22)
•Doesthebatteryneedtobereplaced?(page27)
TROUBLESHOOTING