Specifications

1312
Chapter 5 inStallation
Chapter 5 inStallation
Figure2
Figure 4
Figure3
Figure5
Figure 6
2. Upon Insertion of the CD you
will have a window automatically
open, double click the
icon and
the Setup wizard will appear on
screen, click “Next”.
(SeeFigure2).
3. You can now connect your device
to the USB Bridge. If you are setting
up the USB Bridge for the rst time,
please insert the lithium battery into
the charger base of the USB Bridge
so that it can fully charge
(SeeFigure3)
4. Connect the camera output cable
of your compatible Enhanced Vi-
sion product to the “CAMERA”
input port on the rear of the USB
Bridge.
(SeeFigure4)
5. Connect one end of the included
USB cable to the “USB” port on
the rear of the USB Bridge.
(SeeFigure5)
6. Connect the remaining end of the
included USB cable to an available
high-speed USB 2.0 port on the
front, side or rear of your PC.
(SeeFigure6)
Figure 9
Figure10
Figure 7
Figure 8
9.
You can now click “next” on
the connect the device screen.
(SeeFigure9).
10. Click on the “Install” button to
install the software to the default
application folder. (SeeFigure10).
NOTE:IfyouareanXPuseryouwillhaveaSoftware
andaHardwareInstallationpopupmessage.Press
“Continue Anyway”forboth.(seebelow)
NOTE:IfyouareanXPuserignorethehardware
wizard.
7. Connect the tip of the included
power supply to the “DC 12V” input
port on the rear of the USB Bridge.
(SeeFigure7)
8. Plug in the remaining end of the
power supply to an available AC/
mains outlet (SeeFigure8).