Specifications

1514
Chapter 5 inStallation
Chapter 6 uSing the uSB Bridge
11.The software will start installing.
This should take aprox. 1 min.
(SeeFigure11). At completion
of the installation the Viewer
application will automatically
open and you will have a black,
full screen window.
12.Press the POWER button on
the front of the USB Bridge.
When the power is turned on,
the green “POWER” indicator
will illuminate and your image
should appear on screen. (See
Figure12)
13.To Start the viewer application
in the future, See next page for
instructions.
Figure11
1. Start the viewer applica-
tion by double-clicking on
the “EV” icon, located on
your Windows desktop
 (SeeFigure1).
2. The viewer software will
open a black, full screen
window. You may now
connect your Acrobat,
Flipper, or Max Enhanced
Vision product to your
USB Bridge and to your
PC (See gure 2).
3. Press the POWER button
on the front of the USB
Bridge. When the power
is turned on, the green
“POWER” indicator will
illuminate (SeeFigure3).
4. The camera image should
appear on your PC
screen.
Once the camera image appears on your PC,
adjust the zoom and color mode settings on your
camera as desired. Refer to the manual included
with your Enhanced Vision product for more
information on adjusting these settings.
Figure3
Figure1
Figure2
USING THE USB BRIDGE
Figure12