Specifications
1716
Chapter 6 uSing the uSB Bridge
Chapter 6 uSing the uSB Bridge
4. Press the [F8] function key on your PC keyboard
to toggle the position of the on-screen camera
window. Each press of the [F8] key will rotate the
camera window position clockwise (left, top, right
or bottom, or full screen). After cycling through all
ve camera window positions, pressing the [F8]
key a sixth time will exit the camera viewing win-
dow, returning you to your full screen PC desk-
top. Pressing [F8] again will repeat all six screen
rotation cycles in sequence (See Figure 4).
Figure 4
Adjusting the Video Window Divider:
Once you’ve chosen the position of the on-screen
camera image, use the following procedure to adjust
the width/height of the video window divider, relative
to your PC display:
• If the on-screen
camera image
is positioned to
the left or right of
your display, hold
down the [SHIFT]
button while pressing either the left or right arrow
keys on your PC keyboard to increase or decrease
the width of the video divider window. This adjust-
ment is useful when viewing magnied documents
side-by-side with your PC display.
• If the on-screen
camera image is
positioned to the
top or bottom of
your display, hold
down the [SHIFT]
button while pressing either the up or down arrow
keys on your PC keyboard to increase or decrease
the height of the video divider window. This adjust-
ment is useful when viewing magnied documents
above and below your PC display.