User's Manual

2015-07-31
V029627_02_WOFS_Installation_Guide.docx Page 18 of 20
14 Receiver Status Lights
The Receiver’s Status light is on at all times (after correct installation). Any Receiver that has
been paired with a Transmitter will also have its Transmitter Status lights constantly showing for
each paired set.
The Status of a Transmitter paired to the first location on the Receiver is indicated by the LED
labeled 1, the Transmitter paired to the second location is shown by the LED labeled 2, and so
on. LED lights for unused pairs will remain off (see Figure 22).
Receiver Status Light (See Figure 22):
 A green light shows the Receiver is functioning correctly.
 A red light shows a Transmitter is sending an alarm.
 A yellow light shows that a Transmitter is sending an alert, such as a low battery.
 A flashing blue light indicates the Receiver is in “discoverable mode” (activated by pressing
the Pairing button).
Figure
21
-
Receiver pair status LEDs and
buttons