User's Manual

2015-07-31
V029627_02_WOFS_Installation_Guide.docx Page 6 of 20
4 Connecting the Receiver to the iRMS Using the Smart
Digital Interface
1. On the WOFS Receiver, attach a Ground wire to the Smart Digital Interface (SDI)
Terminal Block to the location labeled GND (see yellow boxes in Figure 5).
Figure 5 - Smart Digital Interface terminal block
2. Open the iRMS unit.
3. Attach the other end of the Ground wire to Terminal Block J8, at location screw #14 (see
Figure 6). For more information, refer to the CHCT manual.
Figure 6 - iRMS terminal Block J8