User`s manual

User’s Manual
23
Blue key: Display book list window
7.2 Schedule Program
1. Press keys to select a future program.
2. Press OK key to pop up EPG schedule window.
3. Set schedule type and mode. For detailed opera-
tions, please refer to 4.3.1 Add Schedule.
4. Move cursor to “OK” and press OK key to save the
new schedule. The scheduled program is marked
with “
”. If you want to cancel this setting, press
OK key again.
5. Press EXIT key to save and exit.
Notes:
 System will remind you near the airtime of the scheduled programs.
 For more details about schedule recording, please refer to 4.3 Schedule Recording.
7.3 Schedule Manage
All the scheduled programs are displayed in this win-
dow. You can cancel or restore schedules.
Select Main Menu → EPG and press OK key to enter.
1. Press Blue key to display book list window when
program list is highlighted.
2. Press
keys to select a schedule.
3. Press OK key to cancel or restore it.
4. Press EXIT key to save and exit.
8. Channel Search
You can set parameters to search channels.
8.1 Antenna Setting
Note: This function should be operated by qualified personnel.
Select Main Menu → Installation → Installation and press OK key to enter.
1. Press
keys to select a satellite in satellite list and press OK key to confirm.
2. Press
key to move cursor to parameter list.
3. Set parameters as follows:
LNB Type: Press
keys to select LNB type
according to your LNB.
Low/High Freq: Set LNB frequency according to
your LNB type.
22K: Press
keys to select ON or OFF ac-
cording to connection of 22K switch.
Note: If “LNB Type” is set to “Universal”, 22K
switch will operate automatically.
DiSEqC: Press
keys to select a proper port a
switch.
LNB Power: If your receiver is connected to LNB, se
Note: Do not change this setting unless your
ccording to connection of DiSEqC
lect “ON”. The default status is “ON”.
LNB is powered on by other satellite