User`s manual

User’s Manual
28
the video appears normally.
Aspect Mode: Press
keys to select Letter Box, PanScan or Default.
Aspect Ratio: Press
keys to select 4:3, 16:9
or Auto.
Subtitle: Select “On” to display Subtitle auto-
matically if available.
Resolve: Press
keys to select a proper
resolution.
Note: If your TV does not support the selected
resolution, there is no video output on screen.
In this case, continue to press
keys until
the video appears again.
Audio Set: Press
keys to select Stereo, Left or
Audio Decode: The receiver can output two types
your digital amplifier has Dolby digital decoder
not, set it to “PCM” to output decoded signal.
Note: If there is no Dolby digital provided in th
“AC3”, program cannot be played with Dolby sound.
2. Press EXIT key to save and exit.
10.3 Resume Default
Warning: This function will restore system
settings to factory defaults and erase all channels.
Select Main Menu → Maintenance → Advance Set →
Resume Default and press OK key, a warning box
pops up for confirmation. Select “OK” and press OK
key to confirm or select “EXIT” and press OK key to
cancel the operation. System will reboot after restor-
ing.
10.4 Modify System Password
System password is required to view programs of the locked channels or enter some menus,
such as Advance Set, Channel Edit, etc. The default password is “0000”. You can modify it if
necessary.
Select Main Menu → Maintenance → Advance Set →
Modify System Password and press OK key to enter.
1. Press number keys to input new password.
2. Input new password again for confirmation.
3. Press EXIT key to save and exit.
Note: Don’t forget the password. Once forget it,
please ask your local operator for help.
Right.
of digital audio signal via S/P DIF port. If
, set it to “AC3” to output encoded signal. If
e program, even though you set it to