User`s manual

User’s Manual
29
10.5 Parental Guide (PG)
You can set PG lock level for programs and modify PG password.
1. PG Lock Level
Select Main Menu → Maintenance → Advance Set →
PG Lock Level and press
keys to select a PG
lock level.
After setting, press EXIT key to save and exit.
Note: PG password is required to view programs
beyond the set level.
2. Modify PG Password
PG password is required to view programs beyond the
set PG lock level. The default password is “0000”. You
can modify it if necessary.
1. Press number keys to input new password.
2. Input new password again for confirmation.
3. Press EXIT key to save and exit.
Note: Don’t forget the password. Once forget it, please ask your local operator for help.
11. OTA (Over the Air) Upgrade
Notes:
 Don’t turn off your receiver during software upgrade.
 During software upgrade, you cannot do other operat
 “OTA Upgrade” is activated if new software is fou
Select Main Menu → Maintenance → Information → OTA
sage box pops up for confirmation. Select “OK” and press
CEL” and press OK key to cancel the operation.
12. Information
You can view smart card status, softcell service status, loader status, etc.
12.1 Smart Card Status
This window displays information about smart card.
Select Main Menu → Maintenance → Information →
enter.
12.2 Softcell Service Status
This window displays information about softcell service.
Select Main Menu → Maintenance → Information →
Softcell Service Status and press OK key to enter.
ions.
nd.
Upgrade and press OK key, a mes-
OK key to confirm or select “CAN-
Smart Card S
tatus and press OK key to