User`s guide

100 VISIONEER PATRIOT 470 (STROBE XP 470) SCANNER USER’S GUIDE
ACCESSING THE TWAIN INTERFACE
As previously stated, you can access the TWAIN interface from any
TWAIN compliant scanning application. You can configure any of your
OneTouch buttons to automatically open the TWAIN interface when
you press a button on the scanner.
Below are instructions for accessing the TWAIN interface from
OneTouch and from PaperPort.
Opening the TWAIN Interface from OneTouch
1. First choose a OneTouch function that you would like to change
the scanning function for, in this example we used the option 9
button.
2. Press, hold down, then release the Simplex or Duplex button.
3. When the OneTouch Properties window opens, the scan option 9
tab will be the active function.
4. Under Select Configuration click on Configure Before Scan.
5. Right-Click on Configure Before Scan and make sure there is a
check mark next to TWAIN.