User`s guide

102 VISIONEER PATRIOT 470 (STROBE XP 470) SCANNER USER’S GUIDE
Opening the TWAIN Interface from PaperPort
1. Open the PaperPort software.
2. Select your TWAIN Visioneer Patriot 470 (Strobe XP 470) scanner
in the Scan Pane.
The first time you open PaperPort the software will prompt you to
select your scanner, and the scanner will be in the list of available
scanners. If you are not prompted, click on the “Select” button in
the scan pane to select your scanner from the list of available
scanners.
If you do not see a Scan pane down the left side of the PaperPort
window, click on the scan button on the toolbar. The scan button is
on the PaperPort tool bar.
3. Now click on the Scan button in the scan pane window.
4. The TWAIN interface will now open.
Note: If the Scan button in the Scan pane is not active, or there is no
scanner listed in the Scan Pane, you may need to setup PaperPort to
access the scanner. Please see “Setting Up Your Scanner to Work With
PaperPort” on page 109 for instructions on setting up PaperPort to
work with the scanner.