User`s guide

38 VISIONEER PATRIOT 470 (STROBE XP 470) SCANNER USER’S GUIDE
SELECTING NEW SETTINGS FOR A BUTTON
For each of the nine OneTouch buttons, you can select a new
Destination Application, Scan Configuration, and Document
Format.
To select new settings for the Scanner Button:
1. Click the button selection arrows to select the button you want to
change.
Each button has its own settings. So, as you click the arrows to cycle
through the buttons, the available settings on the window change to
show them for each button.
2. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See “Selecting Options for a Button” on page 54 to display a full list
of the Destination Applications that you can use with the scanner.
3. From the Select Configuration list, select a scan configuration.
To scan in color, select one of the configurations indicated by the
small color icon. The scan configuration list is preset for the
application you select in the Select Destination list. You can create
your own scan configurations as well.
Select a software application as
the destination to send scanned
documents.
Select a configuration
for scanning the item.
Select a format for
the scanned image.
Click these arrows to see the
properties for the button whose
settings you want to change.