User`s guide

CONFIGURING THE ONETOUCH BUTTONS 75
CONFIGURE BEFORE SCAN
Choosing the scan configuration Configure Before Scan simply opens a
scanning interface when you press or click a scan button. You can then
use the interface to change the Resolution, Scan Mode, and other
settings. When you scan, the scanned image will still be sent as the file
type and to the same Destination Application already selected in the
OneTouch Properties window for that button.
To Set Configure Before Scan:
1. Open the OneTouch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
3. Select the scan configuration Configure Before Scan.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on Configure
Before Scan to get the
menu, and choose the
interface to use for
configuring.