User`s guide

76 VISIONEER PATRIOT 470 (STROBE XP 470) SCANNER USER’S GUIDE
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN interface opens for you to configure the
scanning. See “Scanning with the TWAIN Interface” on page 99.
WIA—The Windows Image Acquisition Interface (WIA) opens for
you to configure the scanning (available on Windows XP or
Windows Vista only). See “Scanning with the Windows Image
Acquisition” on page 114.
5. Click OK or Apply on the OneTouch Properties window.
TO SCAN USING CONFIGURE BEFORE SCAN
1. Put the documents in the scanner’s ADF tray.
2. Either click on the button you set to use the Configure Before Scan
option or press the Simplex or Duplex button on the scanner.
In the example shown on the previous page, the scanning option 9
has been set to use Configure Before Scan with the TWAIN
interface.
3. The TWAIN interface will open.
4. Choose the scanning options applicable to your scan batch.