User Manual

STEP 2: CONNECTING THE SCANNER 7
STEP 2: CONNECTING THE SCANNER
Your OneTouch 7100 scanner connects to any available USB port.
Check your computer’s user’s guide for its USB port locations.
To connect the Visioneer 7100 scanner to a USB port:
1. Turn the scanner over to see the locking tab on the bottom. Slide
the locking tab to the unlocked position.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but always remember to unlock it before
scanning. The scanner will not scan when locked.
Unlocked position